Archive for the 'Woodworking Hardware' Category
Friday, January 8th, 2010
| Slim Linkable LED Lights |
Stylish, efficient strip lighting! Install these slim, linkable lighting strips inside or underneath your cabinets or other areas that call for ambient lighting. A built-in diffuser reduces glare, creates a soft, even glow and casts light in a 90° viewable area. At 2.5 Watts per foot, these fixtures are linkable for up to a 12′ continuous run of lighting (7.2′ total per 18W transformer). As compared to standard LED lighting, these lights are highly economical with a useful life rating of 25,000 hours. Available in three sizes for a variety of applications. Create the configuration of your choice by connecting your ilo L Led strips with LED Linking Cords.
Slim Linkable LED Lights
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Friday, January 8th, 2010
| Pockit® LED Lights |
Futuristic bulb technology sets these lights apart without sacrificing the aesthetic appeal of puck style lights. Replaceable 1 Watt LED chips provide warm white lighting while consuming much less energy and generating much less heat than traditional lighting, with the metal housing acting as a heatsink and the flat LED bulbs emanating a 90° viewable range of light, broader than standard LEDs. Long life LED chips carry a 25,000 hour end of life rating and are easily replaced by popping off the metal ring. Lights can be recessed or surface mounted to achieve the right look for your project.
Pockit® LED Lights
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Thursday, January 7th, 2010
| 18W Transformer for LED Lighting |
Connect up to six 1 Watt or 3 Watt Pockit® LED fixtures or up to 7′ of ilo L LED strip lights to this snap block style 12V DC transformer which plugs into the wall outlet or Touch Switch to deliver appropriate power to your lights. Connectors simply snap in and out to lend adjustability to your system while keeping it up and running.
18W Transformer for LED Lighting
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Thursday, January 7th, 2010
| LED Touch Switch |
Bring control of your lighting system to your fingertips. One touch of the round switch pad turns your lights on or off. The 72” switch cord plugs into the wall and receives the plug from your transformer.
LED Touch Switch
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Saturday, January 2nd, 2010
| Linking Cords for LED Lighting |
12V DC linking cords connect your ilo L LED strips to your transformer to form the configuration of your choice and power your lighting in the location you want it. Cords come in three lengths to fit the demands of your system. See our Slim LED lights to create a continuous run of lighting.
Linking Cords for LED Lighting
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Friday, December 25th, 2009
| Plastic Wire Bushings |
Mount these bushings after drilling through drywall to feed low-voltage cables and wires through the wall smoothly for a simple and organized look. Bushings finish cut drywall edges and prevent crumbling when cables are pulled through or adjusted. Available in three sizes, as listed.
Plastic Wire Bushings
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Thursday, December 24th, 2009
| Closet Hardware |
Stout, sturdy and stylish, metal closet hardware will meet your needs for an
up-to-date solution for hanging clothing in your closets. Rods mount with flanges and brackets on each end (both sold separately). A center support bracket is recommended to maximize the weight each rod will hold. Hollow rods are 1-1/4″ in diameter. 1/16″ metal. High grade steel brackets support
rods up to 1-1/2″ in diameter and shelves up to 12″ deep. Flange Sets come in finishes to match rods and brackets and include flange, collet and mounting screws.
Closet Hardware
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Friday, December 18th, 2009
| Moen SecureMount Anchors, Flat Screen TV Bracket |
Mount your flat panel television exactly where you want it with these smartly
designed mounting anchors. No studs? No problem – optimal flush bracing behind
the wall make these brackets effective in plain drywall or mounted in studs. Simply
drill a 1-1/4” hole for each anchor and install. Includes two SecureMount™ anchors
with anchor screws and guide sleeves to mount a television weighing up to 150 lbs.
Moen SecureMount Anchors, Flat Screen TV Bracket
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Monday, November 30th, 2009
| Torsion Hinge Lid Support with Minor Imperfections, While Supplies Last! |
| SAVE 50%, While Supplies Last! These special buy hinges have very minor cosmetic imperfections, but are fully functional same as new! Hurry! This is a special one-time only offer not available at stores!
Similar to hinges in laptop computers, these heavy-duty cast-zinc hinges allow virtually any size lid to open smoothly, hold its position, and then easily close — all with little effort and no additional hardware! Now available in two attractive finishes, Champagne and Rustic Bronze, to complement any project — from chests, to boxes, to storage units, and more! Designed to fit 3/4″ thick stock. Hinges are available
in 30, 40, and 60 inch-pound ratings.
How many hinges do you need? Use
the Torsion Calculator to help determine your ideal hinge combination.
And for ultra-fast and easy installation, use our Torsion Hinge JIG IT®. Patented.
For more options, see our regular line of Champagne, and Rustic Bronze torsion hinges.
Torsion Hinge Lid Support with Minor Imperfections, While Supplies Last!
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Sunday, November 29th, 2009
| Adjustable Pulls |
Set these solid pulls at the spacing you need to get the look you want! Bases are adjustable to fit pre-existing holes. Simply unscrew the bases completely from the
clamping rings, loosen the set screws from the rings and slide the rings to the desired location. Then tighten the set screws and bases. You’re ready to install your pull for a unique look. Adjustable to 4-1/4” from base to base. 4-3/4” overall length.
Mounting screws included. Available in three finishes, as listed.
Adjustable Pulls
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Friday, November 20th, 2009
| Lapcon Cabinet Lid Support |
A unique lift-assist mechanism makes for easy opening, and doors stay open in any position. Damper enables soft door closing with adjustable speed. Supports install simply along the edge of the cabinet. Left and right-handed models function individually or as pairs for different doors based on torque calculation (door height x 1/2 x door weight). Medium-duty supports are rated for 48-65 in·lbs of torque each. Heavy-duty supports are rated for
65-87 in·lbs of torque each.
Lapcon Cabinet Lid Support
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Friday, November 6th, 2009
| Lateral Opening Door Hinge Set |
Having problems opening large cabinet doors in tight corners and with limited front space? Solved! These hinges are built with a unique lateral swing mechanism that trims the opening radius of cabinet doors dramatically, requiring less than 10” of front space to open doors from 15-3/4” to 19-11/16” wide. A single hinge set opens one cabinet door. Doors pull out slightly and then swing out to the side. Soft-closing
dampers eliminate door slamming, yet your doors will close flush and have a clean look with no external hardware. Easy to set up in single or double door configurations for corners, side-by-sides and kitchen islands. Set contains all hardware needed for one door.
Lateral Opening Door Hinge Set
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
