Archive for the 'Woodturning' Category
Wednesday, September 21st, 2011
| Crown 1/2” 13mm Powder Metallurgy Bowl Gouge, 242PM |
Make turning a little easier and a lot more fun with Crowns exclusive Pro-PM Powder Metallurgy High Crown 242PM 1/2” 13mm Bowl Gouge! This gouge is the ”elite’’ of all turning gouges. Made from an advanced Powder Metal, the molten steel has been compressed and sintered giving this Pro-PM turning tool a cutting edge which lasts up to four/five times that of a conventional High Speed Steel tool. The chisel is hardened to between 66° and 68° Rockwell, enabling it to have a vastly superior wear resistance, excellent grindability, superior toughness, a high working hardness and a high retention of hardness. The ergonomically designed stained black ash handle makes the finished chisel unbeatable.
Crown 1/2” 13mm Powder Metallurgy Bowl Gouge, 242PM
|
 |
Posted in New Products, Woodturning | Comments Off
Tuesday, November 23rd, 2010
| Safety Face Shield |
Get an excellent view of your workspace while protecting your eyes
and face with this his full-coverage Face Shield. Ideal for turning!
Durable safety plastic shield is 15″ wide x 8-1/4″high
Adjusts to multiple head sizes
Safety Face Shield |
 |
Posted in New Products, Woodturning | Comments Off
Saturday, October 30th, 2010
| Spigot Jaws for Oneway Talon Chuck |
| The Oneway Spigot Jaws are machined long and deep for a secure grip on narrow spindles, tenons and cups. Serrations on the outside provide excellent grip while expansion chucking. External (compression) chucking capacity: 1/4″ to 1-5/8″. Internal (expansion) chucking capacity: 1″ to 2-3/8″. Note: not to be used with the woodworm screw. For use with Oneway Talon Chuck (#20761, sold separately).
Spigot Jaws for Oneway Talon Chuck |
 |
Posted in New Products, Woodturning | Comments Off
Saturday, June 5th, 2010
| Birch Gallery Spindles |
Decorative Birch Spindles are sanded and ready for you to finish. Use for spice racks, plate rails, headboards, and more. 8 per pack. Spindles measures 1-1/2″ high (not including tenon), and 3/4″ in diameter at widest point. Tenon is 3/8″ in diameter.
Birch Gallery Spindles
|
 |
Posted in New Products, Woodturning | Comments Off
Saturday, June 5th, 2010
| Maple Gallery Spindles |
Hard Maple Spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks, and headboards. 8 per pack. Spindles measures 1-1/2″ high (not including tenon), and 9/16″ in diameter at widest point. Tenon is 3/8″ in diameter.
Maple Gallery Spindles
|
 |
Posted in New Products, Woodturning | Comments Off
Thursday, April 15th, 2010
| 23” Decorator Spindle |
Long decorator spindle: 23″ long x 1-1/4″ diameter. Length does not include the tenon. Tenon is 1/2″ long x 5/8″ diameter.
23” Decorator Spindle
|
 |
Posted in New Products, Woodturning | Comments Off
Thursday, April 15th, 2010
| Decorator Spindles |
11-1/4” long, including tenons. 13/16” diameter at widest part. Tenons are 3/8” diameter and approximately 3/4” long before turned area. Available in oak (pictured) and birch.
Decorator Spindles
|
 |
Posted in New Products, Woodturning | Comments Off
Thursday, December 24th, 2009
| Mini Eliminator Hollowing Tool |
Two flat sides on the tool shank make the eliminator function as both a left and a right hollowing and detailing tool. Flat sides on the 1/2” shank ensure that the 1/4” Nano-Carbide cutter will always be stable on your tool rest at the optimal angle to produce a clean, tear-free surface on all types of wood, regardless of grain orientation. Cutter stays sharp for up to 100 hours of smooth, clean turning and impressive surface detail work. 1/4” Replacement Cutter (34050) sold separately.
Compatible with the Sorby 16” Sovereign Handle or turn your own handle.
Mini Eliminator Hollowing Tool
|
 |
Posted in New Products, Woodturning | Comments Off
Wednesday, December 23rd, 2009
| Eliminator Non-Handled Hollowing Tool |
Two flat sides on the tool shank make the eliminator function as both a left and a right hollowing tool. Flat sides on the 3/4” shank ensure that the 3/8” Nano-Carbide cutter will always be stable on your tool rest at the optimal angle to produce a clean, tear-free surface on all types of wood, regardless of grain orientation. Cutter stays sharp for up to 100 hours of smooth, clean turning. 3/8” Replacement Cutter (33933) sold separately.
Compatible with the Sorby 16” Sovereign Handle or turn your own handle.
Eliminator Non-Handled Hollowing Tool
|
 |
Posted in New Products, Woodturning | Comments Off
Wednesday, December 23rd, 2009
| Sorby 16” Sovereign Handle |
Use a wide variety of turning tools with this seamless 16” steel handle. The high grade aluminum head and base help dampen vibration and the Softex grip make this handle the ultimate in comfort. Tool shanks of up to 5/8” in diameter are held in place by brass-tipped set screws to prevent damage. Handle is hollow and end cap unscrews to allow addition of lead shot for extra weight to provide greater control of your tools. Includes allen wrenches and collet adapters for 1/2” and 3/8” diameter tools. Made in England.
Sorby 16” Sovereign Handle
|
 |
Posted in New Products, Woodturning | Comments Off
Wednesday, December 2nd, 2009
| New! Stainless Steel Ice Cream Scoop Hardware Kit |
Make your own deluxe dessert disher with this beautiful stainless steel scoop and
ferrule. Get creative with a custom-turned wooden handle, then attach the hardware
for the perfect finishing touch. Instructions for turning a handle and assembling the
ice cream scoop are included.
New! Stainless Steel Ice Cream Scoop Hardware Kit
|
 |
Posted in New Products, Woodturning | Comments Off
Wednesday, November 4th, 2009
| Turned Finial, Oak |
Beautiful turned oak finial is pre-sanded and ready for finishing.
Turned Finial, Oak
|
 |
Posted in New Products, Woodturning | Comments Off
