Archive for the 'Router Bit' Category

Rockler Chamfer Reversible Rail & Stile Bit

Sunday, November 16th, 2008
Rockler Chamfer Reversible Rail & Stile Bit
Make perfect professional looking cabinet doors every time. Use this cutter to
make square edge or arch pattern doors without a fence. One bit cuts both
the rail and stile profiles; simply remove the heads and reverse the positions.
1-5/8″ diameter, 15/16″
cutter length, 1/2″ shank, 1-1/2″ shank length, 22mm bearing.

Rockler Chamfer Reversible Rail & Stile Bit

Rockler Chamfer Reversible Rail & Stile Bit

Rockler Trim Router Bits

Wednesday, September 24th, 2008
Rockler Trim Router Bits
Avoid the tedious setup usually required to trim precise narrow widths of stock. With this shear-cutting bit and the appropriate combination of bearings, just two passes removes exactly 1/16″, 1/8″, or 3/16″ of material - no need for a straightedge! Ideal for trimming doors and panels up to 1″ thick. The kit includes a 3/4″ diameter carbide cutter, two 3/4″ bearings for flush trimming, as well as three single bearings with 5/8″, 1/2″ and 3/8″ diameters for trimming 1/16″, 1/8″, and 3/16″, respectively.

Rockler Trim Router Bits

Rockler Trim Router Bits

Rockler Inlay System

Monday, September 1st, 2008
Rockler Inlay System
A well-placed inlay, or series of inlays, can bring a project to a whole new
creative level—and our simple system makes it faster and easier than ever.
The clear acrylic frame holds the inlay template in place and gives your router
a stable surface to run on, while the spiral bit, template guide and removable
bushing allow you to cut both the inlay and recess with the same template.
The system includes a blank acrylic template insert that you can custom-cut
to your liking. Plus, we have several pre-fabricated patterns, sold separately
below. The Oval and Butterfly Key Sets contain inserts for seven different
sized inlays, while the Poker Set has one for each suit.

Rockler Inlay System

Rockler Inlay System

Louver Router Bit

Monday, July 21st, 2008
Louver Router Bit
Simulate the beauty of louver
doors, shutters, or panels with your router
and this exclusive heavy-duty bit. As long as you have a sub-fence on your
router table and featherboards to hold the stock in place, it’s simple to
produce beautiful, clean 2-13/16″ molding. The 1-1/4″ diameter, 3″ tall bit
features a top bearing for easy reference during the final pass, as well as a
sturdy 1/2″ steel shank.

Louver Router Bit

Louver Router Bit

Rockler Round-Edge Matched Stile and Rail Bit Set

Friday, April 11th, 2008
Rockler Round-Edge Matched Stile and Rail Bit Set
This matched stile and rail bit set is factory set to guarantee a perfect fitting joint every time.
Features a center bearing design. Slot cutter can be easily removed. 1-5/8″
diameter, 1″ cutting length, 1/2″ shank, 1-1/2″ shank length. 22mm bearing.

Rockler Round-Edge Matched Stile and Rail Bit Set

Rockler Round-Edge Matched Stile and Rail Bit Set

Rockler Wedge Tongue and Groove Bit

Wednesday, April 9th, 2008
Rockler Wedge Tongue and Groove Bit
Stronger than dowels and biscuits, the tongue and groove joints you’ll cut
with this bit are perfect for edge-joining panels, table tops, or any other
glue-up project. 1-1/2″ diameter, 1-3/16″ cutter length, 1/2″ shaft, 1-1/2″
shaft length.

Rockler Wedge Tongue and Groove Bit

Rockler Wedge Tongue and Groove Bit

Rockler Classical Reversible Rail & Stile Bit

Wednesday, April 9th, 2008
Rockler Classical Reversible Rail & Stile Bit
Make perfect professional looking cabinet doors every time. Use this cutter to
make square edge or arch pattern doors without a fence. One bit cuts both
the rail and stile profiles; simply remove the heads and reverse the positions.
Available in chamfer, traditional, or classical styles. 1-5/8″ diameter, 15/16″
cutter length, 1/2″ shank, 1-1/2″ shank length, 22mm bearing.

Rockler Classical Reversible Rail & Stile Bit

Rockler Classical Reversible Rail & Stile Bit

Rockler 25 Degree Straight Raised Panel Bit

Tuesday, April 8th, 2008
Rockler 25 Degree Straight Raised Panel Bit
Profiled to a simple, angular straight-line style for a classic fielding
panel. 3-1/2″ diameter, 3/4″ cutter length, 1/2″ shank, 2″ shank length.

Rockler 25 Degree Straight Raised Panel Bit

Rockler 25 Degree Straight Raised Panel Bit

Rockler Ogee Reversible Rail & Stile Bit

Tuesday, April 8th, 2008
Rockler Ogee Reversible Rail & Stile Bit
Make perfect professional looking cabinet doors every time. Use this cutter to
make square edge or arch pattern doors without a fence. One bit cuts both
the rail and stile profiles; simply remove the heads and reverse the positions.
Available in chamfer, traditional, or classical styles. 1-5/8″ diameter, 15/16″
cutter length, 1/2″ shank, 1-1/2″ shank length, 22mm bearing.

Rockler Ogee Reversible Rail & Stile Bit

Rockler Ogee Reversible Rail & Stile Bit