| Router Table Micro Adjuster | |
| Micro adjust your router fence for superior routing accuracy. Onboard clamp attaches to the router table and houses the finely threaded micro adjuster screw. Included rare earth magnet attaches to the reversible screw and attracts the metal fence tab. This allows push and pull adjustment from either side of the fence. |
 |
| Interlock Signmaker’s Templates | |
| Create custom signs quickly and easily with your router in Comic Sans font! Templates interlock to form a stable pattern as you rout signs with appropriate carbide router bits and bushings (3/8″ for 2-1/4″ kits and 5/8″ for 4″ kits, sold separately). Secure patterns to your work surface with Painters Tape (28521), masking tape, 1/2″ or 1″ Self-Adhesive Discs (23138, 28363) or double stick tape. Each Letters Kit includes a total of 40 letters with duplicates of common letters and three spacers. Each Numbers and Symbols Kit includes two each of 0-9 and 9 common symbols including @ and &. Available in two nominal sizes, as listed. All kits require bushings with 3/32” length (sold separately). |
 |
| Formula 2050 Blade & Bit Cleaner, 18 Ounce | |
| Keeps blades, bits and other tools clean for longer tool life and better performance.
|
 |
| Leigh F24 Finger Joint Template – Super 24 | |
| Add even more versatility to your Leigh Super 24 Jig with this precision template. You’ll be able to rout an additional six sizes of finger joints; 3/32”, 3/16”, 3/8” 1/8”, 1/4″, and 1/2″. Two more sizes, 3/4″ and 1”, are easily produced by following a procedure in the User Guide. Plus, a Leigh Technical bulletin includes instructions to route double and triple size joints, all with the same incredible accuracy. That’s 12 sizes in all, with just one template! Finger joints cut on a table saw or other tool seldom fit properly. But with |
 |
| Leigh F18 Finger Joint Template – Super 18 | |
| Add even more versatility to your Leigh Super 18 Jig with this precision template. You’ll be able to rout an additional six sizes of finger joints; 3/32”, 3/16”, 3/8” 1/8”, 1/4″, and 1/2″. Two more sizes, 3/4″ and 1”, are easily produced by following a procedure in the User Guide. Plus, a Leigh Technical bulletin includes instructions to route double and triple size joints, all with the same incredible accuracy. That’s 12 sizes in all, with just one template! Finger joints cut on a table saw or other tool seldom fit properly. But with |
 |
You are currently browsing the archives for the Router Accessories category.
Subscribe to KS Woodowork Feed
Subscribe to KS Woodwork Blog by Email
