Archive for the 'Power Tools' Category
Monday, October 18th, 2010
| Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand |
Heavy-Duty Rolling Table Saw Stand3 Year Limited WarrantyLeightweight design weighs only 33 lbs delivering over 20% less weight to carry than other competitive mobile standsHeavy-Duty kickstand allows the stand to balance upright for mobility and storageQuick connect stand brackets attach to saw for easy detachment from stand for loading and unloadingWide stand base and offset rear legs provide stability and support for material feed controlRetractable soft grip handle slides out allowing the user to pull the saw behind him comfortably with weight near the groundFeatures & Benefits:Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile standsHeavy-duty kick stand allows the stand to balance upright for mobility and storageQuick connect stand brackets attach to saw for easy detachment from standWide stand base and offset rear legs provide stability and support for material feed controlFolding legs with quick release levers collapse under the stand minimizing overall size for transportRetractable soft grip handle slides out allowing the user to pull the saw behind him comfortably with weight near the ground
Dewalt DW7440RS Heavy-Duty Rolling Table Saw Stand |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Monday, October 18th, 2010
| Dewalt DW745 10″ Compact Job Site Table Saw with Site-Pro Modular Guarding System |
10″ Compact Job Site Table Saw with Site-Pro Modular Guarding System3 Year Limited Warranty15 Amp motor quickly rips through hardwoods with easeRack & Pinion fence design delivers consistent fence to blade parallelismTelescoping rails retract to create a small, portable package16″ of rip easily cuts a variety of larger shelving and trim materialsMetal roll cage base offers greater durability than plastic basesIncludes:Miter GaugePush Stick10″ 24T Carbide BladeBlade GuardFeatures & Benefits:Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application15 Amp motor quickly rips through hardwoods with easeRack and Pinion fence rails make fence adjustments fast, smooth and accurateTelescoping fence rails retract to create a small, portable packageOn Board Storage provides easy access to the Site-Pro Guarding components and push stick when not in use16″ of rip easily cuts a variety of larger shelving and trim materials
Dewalt DW745 10″ Compact Job Site Table Saw with Site-Pro Modular Guarding System |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Sunday, October 17th, 2010
| Dewalt DW756 Heavy-Duty 6″ (150mm) Bench Grinder |
Heavy-Duty 6″ (150mm) Bench Grinder3 Year Limited WarrantyPowerful 5/8 HP induction motor for heavy-duty grinding operationsIndustrial cast iron base and motor housing provide durability and prolong lifeMotor runs at 3,450 rpm for high speed material removalPrecision-machined aluminum tool rests allow the user to accurately position workRear exhaust ports in wheel guards for smoother operationIncludes:36 grit wheel60 grit wheeleye shieldsspark deflectorstool restsadjusting wrenchFeatures & Benefits:Powerful 5/8 HP induction motor for heavy-duty grinding operationsIndustrial cast iron base and motor housing provide durability and prolong lifeMotor runs at 3,450 rpm for high speed material removalPrecision-machined aluminum tool rests allow the user to accurately position workRear exhaust ports in wheel guards for smoother operation12-1/2″ distance between wheels for longer and larger grinding applications
Dewalt DW756 Heavy-Duty 6″ (150mm) Bench Grinder |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Sunday, October 17th, 2010
| Dewalt DW758 Heavy-Duty 8″ (205mm) Bench Grinder |
Heavy-Duty 8″ (205mm) Bench Grinder3 Year Limited Warranty3/4 HP induction motor provides superior power for industrial grinding applicationsRugged cast iron base and motor housing provide durability and prolonged lifeMotor runs at 3,600 rpm for high speed material removalPrecision-machined aluminum tool rests allow the user to accurately position workRear exhaust ports in wheel guards for a smoother operationIncludes:36 grit wheel60 grit wheeleye shieldsspark deflectorstool restsadjusting wrenchFeatures & Benefits:3/4 HP induction motor provides superior power for industrial grinding applicationsRugged cast iron base and motor housing provide durability and prolonged lifeMotor runs at 3,600 rpm for high speed material removalPrecision-machined aluminum tool rests allow the user to accurately position workRear exhaust ports in wheel guards for a smoother operation12-1/2″ distance between wheels for larger and longer grinding applications
Dewalt DW758 Heavy-Duty 8″ (205mm) Bench Grinder |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Saturday, October 16th, 2010
| Dewalt DW7450 Table Saw Stand for DW745 |
Table Saw Stand for DW7453 Year Limited WarrantyIncludes:Hardware BagFeatures & Benefits:Folds flat for easy storage and transportHeavy-duty tube steel construction maximizes durability under loadIntegral support bar hardware holes secure the saw to the stand
Dewalt DW7450 Table Saw Stand for DW745 |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Saturday, October 16th, 2010
| Dewalt DW861W Heavy-Duty 4.5″ Wet/Dry Masonry Saw |
Heavy-Duty 4.5″ Wet/Dry Masonry Saw3 Year Limited WarrantyThe high power 12.5 Amp motor produces adequate power to cut through granite, porcelain, concrete and other stone materialsThe premium 4 1/2″ diamond blade allows the user to cut ceramics and stone materials up to 3cm deep – wet or dry13′ Water Line feeds water to the blade decreasing dust and increasing blade performance and lifeBevels to 45 degrees for quick angled cutsLock-on button reduces fatigue during production cutsAdjustable depth of cut allows user to cut at various depthsIncludes:13′ water line4-1/2″ wet/dry diamond blade2 wrenches for blade changeFeatures & Benefits:Power 12.5 Amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materialsPremium 4-1/2″ diamond blade allows the user to cut ceramics and stone materials up to 3cm deep – wet or dry13′ water line feeds water to the blade decreasing dust and increasing blade performance and lifeBevels to 45 degrees for quick angled cutsLock-on button reduces fatigue during production cutsAdjustable depth of cut allows user to cut at various depths
Dewalt DW861W Heavy-Duty 4.5″ Wet/Dry Masonry Saw |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Friday, October 15th, 2010
| Dewalt DW872 Heavy-Duty 14″ (355mm) Multi-Cutter Saw |
Heavy-Duty 14″ (355mm) Multi-Cutter Saw3 Year Limited Warranty15 Amp / 4.0 HP motor provides more overload capacity to increase performance and durabilityMulti-Cutter offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metalsUtilizing a carbide tipped blade allows the depth of cut to remain constant throughout blade life.Multi-Cutter cuts 4 times faster than chop saws and 8 times faster than portable band saws in 2″ x 2″ x 1/4″ angle ironIncludes:14″ carbide tipped bladewrenchvertical clampFeatures & Benefits:Multi-Cutter offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metalsUtilizing a carbide tipped blade, the depth of cut remains constant throughout blade lifeMulti-Cutter cuts 4 times faster than chop saws and 8 times faster than portable band saws in 2″ x 2″ x 1/4″ angle iron14″ 70-tooth carbide tipped blade delivers a lower cost-per-cut compared to cutting with abrasive wheelsSpecially designed carbide teeth deliver fast, precise, virtually burr-free cuts reducing the need for preparation grinding, and finished cuts that are cool to the touchLargest capacity in its class with even more capacity than a deep-cut portable band saw (5-3/16″ round & 4-1/2″ x 6-1/2″ rectangular) allowing user to cut a wider variety of different size materials for more applications
Dewalt DW872 Heavy-Duty 14″ (355mm) Multi-Cutter Saw |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Friday, October 15th, 2010
| Dewalt DW898 Heavy-Duty 14 Gauge Nibbler |
Heavy-Duty 14 Gauge Nibbler3 Year Limited WarrantyHigh output, 6.5 Amp, motor for long life in continuous-duty applicationsRound punch allows 360¦ pivot while cuttingRotating head allows changing cutting directions as desiredNo distortion to material being cutPaddle switch for convenient one-handed operationEasy to change punch and die saving time and moneyFeatures & Benefits:Powerful, 6.5 Amp, motor for long life in continuous-duty applicationsRound punch allows 360¦ pivot while cuttingRotating head allows changing cutting directions as desiredNo distortion of material being cutPaddle switch for convenient one-handed operationEasy to change punch and die saving time and money
Dewalt DW898 Heavy-Duty 14 Gauge Nibbler |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Thursday, October 14th, 2010
| Dewalt DW9061 9.6V Extended Run-Time Battery |
9.6V Extended Run-Time Battery3 Year Limited WarrantyHigh capacity battery has 25% more run-time than compact batteriesPowers entire DEWALT« line of 9.6V tools except Univolt tools allowing users to run multiple tools off of the same battery packFeatures & Benefits:High capacity battery has 25% more run-time than compact batteriesPowers entire DEWALT« line of 9.6V tools except Univolt tools allowing users to run multiple tools off of the same battery pack
Dewalt DW9061 9.6V Extended Run-Time Battery |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Thursday, October 14th, 2010
| Dewalt DWS5025 TRACKSAW Track Bag |
TRACKSAW Track Bag3 Year Limited WarrantyIncludes:tack bagFeatures & Benefits:Bag fits both 46″ and 59″ Track for protecting tracks while transporting and storing
Dewalt DWS5025 TRACKSAW Track Bag |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Wednesday, October 13th, 2010
| Dewalt DWS5026 Track Saw Track Clamps |
Track Saw Track Clamps3 Year Limited WarrantyIncludes:(2) Track Saw Track ClampsFeatures & Benefits:For use with Track Saw cutting system.One-handed operation for fast set-up.
Dewalt DWS5026 Track Saw Track Clamps |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Wednesday, October 13th, 2010
| Dewalt DWS520CK Heavy-Duty 6-1/2 (165mm) TrackSaw Kit with 59″ & 102″ Track |
Heavy-Duty 6-1/2 (165mm) TrackSaw Kit with 59″ & 102″ Track3 Year Limited WarrantyIncludes:DWS520 Heavy-Duty TrackSawKit Box6-1/2″ (20mm arbor size) 48-Tooth Ultra Fine finishing BladeBlade wrench59″ Track102″ TrackFeatures & Benefits:Zero clearance TrackSaw cutting system delivers precise, straight, splinter-free cuts.For use with TrackSaw dual-edged tracks for perfectly straight cuts in both directions.On-track cut depth: 2-1/8™ (54mm) @ 90¦, 1-5/8″ (41mm) @ 45¦; depth scale accurately indicates exact depth of cut accounting for track thickness.12A, 1300W motor effortlessly powers through hard woods up to 2-1/8″ thick.Continuous Anti-Kickback mechanism & riving knife prevent kickback when engaged.Low profile blade guard allows saw to be used in confined spaces.
Dewalt DWS520CK Heavy-Duty 6-1/2 (165mm) TrackSaw Kit with 59″ & 102″ Track |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
