Archive for the 'Power Tools' Category
Tuesday, November 16th, 2010
| DeWalt 12V MAX Compact 3/8” Cordless Drill/Driver |
| This Drill/Driver boasts the versatility of a traditional drill chuck with a two-speed transmission and the compact design common to all of DeWalt’s 12V MAX platform. The 3/8″ chuck accepts drill bits as well as drivers, and it has a greater speed range of 0-1500 RPM. The chuck is encircled by three LED lights that cast bright, shadow-free task lighting exactly where it’s needed, and the compact head and chuck fit into tight spaces. Sculpted ergonomic handle cuts down on hand fatigue. Includes Drill/Driver, (2) 12V Li-Ion batteries, 40-min charger, belt hook, bit tip and contractor bag.
Also available in a combo package with the DeWalt 12V MAX Impact Driver (see #41453).
DeWalt 12V MAX Compact 3/8” Cordless Drill/Driver |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Tuesday, November 16th, 2010
| DeWalt DWP611PK Compact Router Combo with Fixed and Plunge Bases |
A light, ergonomic compact router with variable speed control, plus a full-featured plunge base—the ultimate handheld powerhouse! Smooth-sliding plunge base has rubber handles, a five-step turret stop, and sliding depth-rod with micro-rod for fine adjustments. LED lighting in base with clear sub-bases for optimum visibility. Powerful 1-1/4 hp motor is perfect for trimming laminate, cutting flutes, edge profiling and even mortising. All-metal motor can is designed for durability, and motor features soft-start and electronic speed control to maintain speed under load. Intuitive depth adjustment ring, quick-release tabs and adjustable clamp make adjustments a snap. 1/4″ collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.
DeWalt DWP611PK Compact Router Combo with Fixed and Plunge Bases |
 |
Posted in Dewalt, New Products, Routers | Comments Off
Sunday, October 31st, 2010
| GRR-Ripper GR200 System |
| Far more than an ordinary push block, the GR200 is a highly evolved workpiece support system that enables you to safely rip strips as thin as 1/4″, resaw, rip small or angled pieces, short offcuts and more. It applies even pressure to both the main stock and the offcut piece, preventing snipe, lifting, burning and kickback. The high-friction pads cling firmly to any point along the stock, enabling the GR200 to easily grip oddly-shaped pieces – great for pattern routing. Unit comes with 1/4″ and 1/2″ side legs, adustable center leg, adjustable 1″ fence-side spacer for wider stock, and a stabilizing accessory plate with balance unit for leveling the unit when cutting narrow pieces and for attaching shop-made fixtures. Also includes comprehensive users manual. Made in USA.
GRR-Ripper GR200 System |
 |
Posted in New Products, Power Tools | Comments Off
Wednesday, October 27th, 2010
| Biesemeyer 18-901 Universal Drill Press Fence |
Simple, accurate design and vaunted Biesemeyer quality make this fence a sure-fire
favorite on any drill press. The extruded aluminum fence can be oriented vertically to
support tall workpieces, or horizontally for easy handling when working with narrow
pieces, or when clearance is needed for the chuck. Two cam-action clamps slide along
T-tracks in the drill press table—simply close them to lock the fence in position. A
flip-down stop is also included, which can be lengthened or shortened depending on
the orientation of the fence, and a scale is integrated to make setting the stop a snap.
Fence body is 24″L x 2-1/2″ x 1″.
Biesemeyer 18-901 Universal Drill Press Fence |
 |
Posted in New Products, Power Tools | Comments Off
Tuesday, October 26th, 2010
| Porter-Cable 7518 Variable Speed 3-1/4 HP Motor Only |
| Achieves five speeds (10,000, 13,000, 16,000, 19,000 and 21,000 RPM), the Porter-Cable 75182 can handle a wide variety of home improvement projects. This rotor motor operates at a peak power of 3-1/4 horsepower to ensure consistent speed levels, and its completely sealed ball bearing construction combines with its machined aluminum motor housing to provide long term durability. For added convenience, the 75182 can be used as a replacement motor for router model 7518, and also works with 7500-series fixed base model 75361.
Porter-Cable 7518 Variable Speed 3-1/4 HP Motor Only |
 |
Posted in New Products, Power Tools | Comments Off
Tuesday, October 26th, 2010
| DeWalt DWP611 Compact Router, Fixed Base |
| This compact, lightweight router with variable speed control offers the comfortable ergonomics of a trim router and the power and features of its full-sized cousins. LED lighting in base with clear sub-base for optimum visibility. With 1-1/4 hp, it’s perfect for a variety of tasks, from trimming laminate, cutting flutes, edge profiling and even mortising with the plunge base (sold separately). The all-metal motor can is designed to stand up to jobsite abuse, and the motor features soft-start and electronic speed control to maintain its speed under loads. An intuitive depth adjustment ring, quick-release tabs and an adjustable clamp make adjustments a snap. The 1/4″ collet is extra-long for better contact with the bit, and the spindle lock features a large button and 12 detentes for easy bit changes.
DeWalt DWP611 Compact Router, Fixed Base |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Monday, October 25th, 2010
| Feather Loc Value Kit |
Amp up the safety factor in your shop with this value-priced 3-pack from Bench Dog Tools!
You get:
One Blade-Loc for safer blade changes
Two Feather-Loc featherboards to protects your hands during cutting
Bench Dog Tools lifetime quality and durability guarantee
Feather Loc Value Kit |
 |
Posted in New Products, Power Tools | Comments Off
Thursday, October 21st, 2010
| CNC Shark Pro Plus, Just released at IWF 2010! |
New Items on the Shark Pro Plus Enhanced controller with more power that allows up to 200 inches per min Increased travel on the machine with a max cutting capacity of 25 x 25 x 5 inches Automatic on and off software control of Router Professional Aluminum case with Push button Estop.
Pendant control capability included. (Designed for numeric laptop keypad)
Cut 3D software included ($300 Value!)
20 3D models, font and graphic package provided Extended Aluminum T slot top (28-1/2” x 36”) for more versatile clamping
Precision lead Screws with anti backlash on all axis
Includes V-Carve 5.5 software, 1/2” dia. V-groove Bit and two hold-down clamps!
Bring the speed and precision of computer-controlled machinery to your shop with this top value CNC system! With a table measuring 28-1/2” x 36” it’s ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine.
It is fully compatible with the Bosch Colt Palm Router and includes a 1/2″ diameter V-groove router bit. The CNC Shark also includes the new version 5.5 of the VCarve Pro software interface — a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB cable to the controller box and the other end to your computer (not compatible with Mac computers).
Visit a store near you for a live Demo!
Introducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark and CNC Shark Pro users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects. Now online – visit today!
CNC Shark Pro Plus, Just released at IWF 2010! |
 |
Posted in New Products, Power Tools | Comments Off
Wednesday, October 20th, 2010
| DeWalt Magnetic Drive Guide Set |
Seven-piece set includes two Drive Guides with self-retracting sleeves to guide the screw home without slipping, folding or wobbling — every time! Protect your fingers and protect the workpiece from dangerous slippage. Includes 2 Magnetic Drive Guides: 1 for 2″ screws, 1 for 4″ screws, 3 Phillips bit tips, 1 slotted bit tip, and 1 square-drive bit tip.
DeWalt Magnetic Drive Guide Set |
 |
Posted in Dewalt, New Products | Comments Off
Wednesday, October 20th, 2010
| DeWalt 7-Piece Torx Bit Driver Set |
Seven torx drivers in a compact pocket-size set. Includes T10, T15, T20, T25, T27, T30 and T40 bits. Bits are 1/4″ hex-drive and 1″ long.
DeWalt 7-Piece Torx Bit Driver Set |
 |
Posted in Dewalt, New Products | Comments Off
Tuesday, October 19th, 2010
| Dewalt DW7350 Mobile Thickness Planer Stand |
Mobile Thickness Planer Stand3 Year Limited WarrantyIncludes:mobile basestandhardwareMDF topshelfFeatures & Benefits:Maximim versatilityDurable and stable under heavy loadsEasy movement and storage of planer and stand
Dewalt DW7350 Mobile Thickness Planer Stand |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
Tuesday, October 19th, 2010
| Dewalt DW734 Heavy-Duty 12-1/2″ Thickness Planer with Three Knife Cutter-Head |
Heavy-Duty 12-1/2″ Thickness Planer with Three Knife Cutter-Head3 Year Limited Warranty96 cuts per inch to ensure superior surface finishThree knife cutter-head delivers 30% longer knife lifeFour column carriage lock to reduce snipe33-1/2″ of material support tablesDisposable, reversible knives made of M2 laminated tool steel for maximum durabilitySimple, one tool knife change systemIncludes:dust hoodFeatures & Benefits:Powerful 15.0 Amp, 10,000 rpm motor handles larger, deeper cuts in hardwoods.Three knife cutter-head provides 96 cuts per inch, one of the finest finishes of any portable planer.Disposible, reversible knives deliver 30% more knife life and make knife change fast and easy.Four-column carriage lock drastically reduces the movement that causes snipe.Extra-long infeed and outfeed tables provide 33-1/2″ of material support.Material removal gauge and thickness scale deliver accurate cuts with every pass.
Dewalt DW734 Heavy-Duty 12-1/2″ Thickness Planer with Three Knife Cutter-Head |
 |
Posted in Dewalt, New Products, Power Tools | Comments Off
