Archive for the 'Kreg' Category
Tuesday, September 14th, 2010
| Kreg Jig K4 Master System – New |
The K4 Master System wraps all the versatility and ease-of-use of pocket hole joinery
into one simple, intuitive jig. With a sturdy toggle clamp to secure your stock to the jig,
and a large frontal clamping recess for securing the jig to the bench, you’ll get perfect
alignment every time. Thanks to the removable drill guide and portable base, you have
the option of taking the jig to large work pieces and awkward locations or slipping it
in your pocket for work on the job site. The material support stop guarantees perfect
repeatability time after time, and the dust collection shroud aids in chip expulsion for
faster, cleaner drilling.
Kreg Jig K4 Master System – New |
 |
Posted in Kreg, New Products | Comments Off
Thursday, June 10th, 2010
| Kreg® Multi-Mark Layout Tool |
Take on a multitude of measuring, marking and layout tasks with just one tool! The Multi-Mark is a layout tool, T-square, torpedo level, trimming tool, depth gauge and more all in one unit. A three-way adjustable rule functions as a depth gauge, miter layout tool or traditional 6″ ruler with standard scales to 1/16″ and metric scales to 1mm. Locking ruler is ideal for transferring measurements to bring accuracy and repeatability to your projects.
Kreg® Multi-Mark Layout Tool
|
 |
Posted in Kreg, New Products | Comments Off
Saturday, May 8th, 2010
| Kreg® Protec-Kote™ Deck Screws |
A trio of anti-corrosion layers protect these screws from rust as they hold your deck boards in place. Recommended for use with ACQ treated lumber. Designed for the Kreg® Deck Jig System (36613, sold separately) with self-tapping tips and KTX square drive heads.
Kreg® Protec-Kote™ Deck Screws
|
 |
Posted in Kreg, New Products | Comments Off
Saturday, May 8th, 2010
| Kreg® Stainless Steel Deck Screws |
Your best bet for long-term protection against corrosion in decking applications. These 2” screws feature self-tapping tips and KTX square drive heads to reduce cam-out. Designed for use with the Kreg® Deck Jig System (36613, sold separately).
Kreg® Stainless Steel Deck Screws
|
 |
Posted in Kreg, New Products | Comments Off
Friday, May 7th, 2010
| Kreg® Deck Drill Bit/Depth Collar |
Stepped drill bit design is made specifically for work with the Kreg® Deck Jig System (36613, sold separately). Includes a depth collar so your pilot holes will be uniform in diameter, depth, angle and position when you drill with the Deck Jig System. Also includes an allen wrench.
Kreg® Deck Drill Bit/Depth Collar
|
 |
Posted in Kreg, New Products | Comments Off
Friday, May 7th, 2010
| Kreg® Deck Jig System |
The best helper you’ll ever have for building decks, fencing and more! This jig guides you as you drill and drive deck screws at the optimal angle to achieve concealed fastening of deck boards. No more exposed nails or screws! An easy grip handle and 90° alignment tab make setup extremely easy. The onboard drilling jig is preset at the optimal angles for straight-on as well as left and right corner fastening. Simply drill your holes with the included bit and drive the deck screws with the included square drive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards.
Kreg® Deck Jig System
|
 |
Posted in Kreg, New Products | Comments Off
Friday, September 25th, 2009
Posted in Kreg, New Products | Comments Off
Thursday, September 10th, 2009
| Kreg Micro Pocket Drill Guide |
Pocket holes and pocket screws are great for joining work pieces, but sometimes
standard pocket holes are simply too big (on thin stock, picture frames, small drawer
boxes, etc.). When that’s the case this miniature drill guide is ideal. It has a 25%
smaller hole diameter and includes a Micro Pocket™ Drill Guide, Drill Bit and Depth
Collar, as well as a Starter Screw Set. Replacement accessories also available
individually, below.
Kreg Micro Pocket Drill Guide
|
 |
Posted in Kreg, New Products | Comments Off
Friday, August 7th, 2009
| Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit |
| Affordable, quality screw kit contains five of the most popular screw sizes for pocket hole joinery, and now comes in a new and improved case. Includes #6 x 1″ pan-head fine (150), #7 x 1-1/4″ washer-head fine (150), #8 x 2-1/2″ washer-head coarse (75), #8 x 1-1/4″ washer-head coarse (150), and #7 x 1″ pan-head coarse (150). All screws feature a self-tapping tip and deep, #2 square drive recess.
Kreg™ 675-Pc. Self-Tapping Pocket Hole Screw Kit
|
 |
Posted in Kreg, New Products | Comments Off
Wednesday, May 27th, 2009
| Kreg True-FLEX Featherboard |
This solidly built, rugged unit will give you the ability to take on more advanced projects that the router table demands.
Kreg True-FLEX Featherboard
|
 |
Posted in Kreg, New Products | Comments Off
Sunday, May 24th, 2009
Posted in Kreg, New Products | Comments Off
Saturday, May 23rd, 2009
| Kreg DVD: The Pocket Hole Solution to Trim Carpentry |
| If you’re a professional Trim Carpenter or a serious DIY woodworking enthusiast, you owe it to yourself to learn more about Pocket Hole Joinery! Pocket Hole Joinery is a relatively new joinery technique that uses a special Pocket Hole Jig, step drill bit, and self-tapping screws to produce strong, tight-fitting wood joints in a fraction of the time of more traditional methods such as doweling, biscuiting, and mortise and tenons.Gary Striegler, a second generation homebuilder with over 25 years of hands-on experience, demonstrates some of his time-proven techniques for creating classic home details that set his work apart from the competition. In this two hour DVD, watch as Gary uses the speed, strength, and simplicity of Pocket Hole Joinery to create a variety of eye-catching trim details for the home.
Kreg DVD: The Pocket Hole Solution to Trim Carpentry
|
 |
Posted in Kreg, New Products, Videos | Comments Off
