Archive for the 'Hand Tools' Category
Wednesday, September 28th, 2011
| Flexcut® Beginner Craft Carver Set |
Learn the right way to carve with this Beginner Craft Carver Set from Flexcut®! Includes a an interchangeable palm handle, three carving blades, a basswood boot blank, manual and project guide and an instructional DVD. All blades are made with precision-machined carbon steel that’s been heat treated to harden the cutting edge so it stays sharp. The carved ash handle allows for extended use without hand fatigue.
Flexcut® Beginner Craft Carver Set
|
 |
Posted in Hand Tools, New Products | Comments Off
Wednesday, May 18th, 2011
| Ratcheting Hex Key Wrench Set, While Supplies Last! |
The next generation of hex wrenches! On top of a full set of hex wrenches, this model boasts an ergonomic ratcheting handle, giving you more leverage for faster and simpler hex bolt manipulation. A convenient
switch toggles the wrench’s ratcheting direction for easy transition between tightening and loosening. It folds to a compact 1″ x 4″ carrying size.
Standard Set includes:
5/64″
1/8″
3/16″
3/32″
9/64″
7/32″
7/64″
5/32″
1/4″
Metric Set includes:
1.5mm
2mm
2.5mm
3mm
3.5mm
4mm
5mm
5.5mm
6mm
Ratcheting Hex Key Wrench Set, While Supplies Last! |
 |
Posted in Hand Tools, On Sale | Comments Off
Monday, November 22nd, 2010
| MagnaTip™ Magnetic Tape Measure Attachment (Tape Measure Not Included) |
Taking long measurements by yourself just got a whole lot easier! The magnet sticks to any metal object or use the built-in tabs to hold edges for easy one-person measuring. A must for carpenters, electricians, or any tradesman who uses a tape measure.
Turns your tape into a powerful magnetic pick-up tool – holds up to 4 lbs.
Snaps on and off easily
Fits most 1″ wide tapes
MagnaTip™ Magnetic Tape Measure Attachment (Tape Measure Not Included) |
 |
Posted in Hand Tools, New Products | Comments Off
Sunday, October 31st, 2010
| Pro-Angle Digital Protractor |
| No more squinting at those tiny tick marks — this protractor replaces the thin lines with a large, easy-to-read display. Simply swing open the pivoting arm and read the angle instantly on the digital readout. Display can also be inverted when needed, and a separate button “flips” the reading 180°. Hold function saves your measurement so you won’t forget it. Absolute and relative measurements. Accuracy: 0.1°. Resolution 0.05°. Range 0° to 180°.
Pro-Angle Digital Protractor |
 |
Posted in Hand Tools, New Products | Comments Off
Sunday, October 3rd, 2010
| Woodworker’s Triangles |
Heavy-duty acrylic triangles are twice as thick as regular drawing triangles and are
convenient for many common layout tasks, especially cabinetmaking. Clear acrylic
composition allows complete visibility as you work. Straight edges are 11″ on the long
leg and offer markings to 1/16″. Angles are marked every 15° and at 22.5°. Available in
30-60-90 and 45-90-45 models.
Woodworker’s Triangles |
 |
Posted in Hand Tools, New Products | Comments Off
Sunday, October 3rd, 2010
Posted in Hand Tools, New Products | Comments Off
Saturday, October 2nd, 2010
| Double T-Track Fence Cap |
Mounts to any 3/4″ fence to give you two universal T-Tracks parallel to your table
surface. Pre-drilled holes make installation to any subfence easy. Made for use with
Flip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893). Made of
extruded aluminum. 36″ length.
Double T-Track Fence Cap |
 |
Posted in Hand Tools, New Products | Comments Off
Saturday, October 2nd, 2010
| T-Track Tape Measures |
Need a measuring reference on your T-Track device? These 36″ tape measure inserts fit
any universal T-Track to give you accurate measurements to 1/16″ along your fence for
on the fly adjustments and more. Inserts are plastic extrusions with a steel rule. Works
well with the Double T-Track Fence Cap (39944) and Multi Track (35605 and 34262).
Each tape comes with an acrylic hairline indicator with adhesive backing that can be
attached to Rockler Flip Stops (26991 and 31214) or other homemade stops.
T-Track Tape Measures |
 |
Posted in Hand Tools, New Products | Comments Off
Friday, October 1st, 2010
| 100 Piece Security Driver Set, While Supplies Last! |
Turn just about any screw or bolt with this huge assortment of common and hard-tofind
bits, all in a compact blow-molded case. Far too many to list, but among others it includes: Phillips, slotted, square drive, Torx(r), Pozi-drive, imperial and metric hex,
tamper-resistant Torx(r), tamper-resistant hex, clutch drive, spline drive, spanner,
extension, socket adaptor, and three-wing and four-wing drive bits.
Offer valid while supplies last! Quantities are limited!
100 Piece Security Driver Set, While Supplies Last! |
 |
Posted in Hand Tools, New Products | Comments Off
Wednesday, September 29th, 2010
| 16” Woodworker’s Ruler |
Here’s a versatile rule to keep on hand for layout jobs. With a center-finding rule
along one edge and a standard 16″ rule along the other, it breezes effortlessly from
measuring to marking to drafting. The clear acrylic material makes lining up the
graduations with the layout lines fast and accurate, and it’s ideal for finding centers
in drawer fronts when locating pulls and knobs. Nearly 1/4″ thick, its rigidity and
the tapered edges yield straight, true lines. The 0 marks are set in from the ends for
maximum accuracy when lining up the ruler, and the first inch is graduated in 1/32″
and the rest in 1/16″ for ease of reading.
16” Woodworker’s Ruler |
 |
Posted in Hand Tools, New Products | Comments Off
Wednesday, September 29th, 2010
| Adjustable Aluminum Angle Finder/Protractor |
Accurately measure angles from 15° to 170° to ensure proper layout for cuts, corners,
joints and more. Protractor is anchored to pivoting 20″ and 9″ ruler arms, and the
angle indicator moves along the protractor as ruler arms are opened and closed. Ruler
arms feature standard measurement accurate to 1/16″ and metric measurement
accurate to 1mm.
Adjustable Aluminum Angle Finder/Protractor |
 |
Posted in Hand Tools, New Products | Comments Off
Tuesday, September 28th, 2010
| Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge |
Get the tool alignment and adjustment gauge Fine Woodworking magazine calls “the best we’ve seen.” From spindle and arbor runout to blade alignment, dado depth, router bit height and more, the Betterley UNA-GAUGE packs an amazing range of measurement capabilities into a single tool.
Features:
Instant incremental readings of .001” – simply “dial in” precise tool settings
Measurement range of 3” above and 2” below the reference surface
Miter slot attachment included for precise table-to-blade alignment
Modular design provides multiple vertical and horizontal positions for the dial indicator
Simple, tool-free repositioning of support legs allows fast, versatile set-up for a variety of measurement tasks
Integrated rare earth magnets hold the gauge firmly to any steel surface, ensuring accuracy and leaving hands free to make adjustments
Modular components made from durable anodized aluminum to ensure accuracy and a lifetime of service.
Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge |
 |
Posted in Hand Tools, New Products | Comments Off
