Archive for the 'Festool' Category
Friday, September 12th, 2008
Posted in Festool, New Products | No Comments »
Friday, September 12th, 2008
Posted in Festool, New Products | No Comments »
Thursday, September 11th, 2008
Posted in Festool, New Products | No Comments »
Monday, July 21st, 2008
| Kapex Crown Stop with Base Extension |
This accessory for Festool’s Kapex Compound Miter Saw attaches to either side of the Kapex deck. Sold separately, it supports nested workpieces at any angle and provides additional material support. Festool FS Clamps can be combined with the Crown Stop to create additional clamping possibilities. Includes one base extension and on crown stop. Two are required for cutting crown molding in the nested position.
Kapex Crown Stop with Base Extension
|
 |
Posted in Festool, New Products | No Comments »
Sunday, July 20th, 2008
| Festool 64-Tooth Laminate Kapex Saw Blade |
This 260 mm diameter carbide-tipped, triple chip saw blade is specially designed for cutting laminate. Like all of Festool’s circular saw blades, it is engineered and designed for cutting efficiency, long-life, and superior cutting results. 2.5 mm kerf. 30 mm bore.
Festool 64-Tooth Laminate Kapex Saw Blade
|
 |
Posted in Festool, New Products | No Comments »
Sunday, July 20th, 2008
| Festool MiterFast Angle Transfer Device |
The MiterFast is included as a standard component with the Kapex compound miter saw but can be purchased separately as a replacement unit. Used for transferring complex angles to the Kapex from inside or outside corner, the MiterFast has an aggressive locking mechanism and reflective surface aiding visibility of the Kapex dual lasers.
Festool MiterFast Angle Transfer Device
|
 |
Posted in Festool, New Products | No Comments »
Saturday, July 19th, 2008
| Festool Kapex Clamping Kit |
This kit can be used to secure the Kapex sliding compound miter saw to the Festool MFT/3 table. The bolts from the Clamping Kit drop through the top of the Kapex and the knobs are used to secure the Kapex in place on the under side of the MFT/3 perforated top plate. Sold in packs of two.
Festool Kapex Clamping Kit
|
 |
Posted in Festool, New Products | No Comments »
Saturday, July 19th, 2008
| Festool MFT/3 Kapex Table |
This multi-function table is designed specifically for use with the Kapex sliding compound miter saw. It features additional holes in the perforated top plate for positioning the feet of the Kapex and for mounting with clamps or the Kapex Mounting Kit. When combined with the standard MFT/3, the deck of the Kapex will match the height of the MFT/3 for additional material support.
Festool MFT/3 Kapex Table
|
 |
Posted in Festool, New Products | No Comments »
Friday, July 18th, 2008
| Festool Kapex Hold-Down Clamp |
This useful clamp is included with the Kapex compound miter saw but can be purchased separately as a replacement item. Used for securing material, it can attach on the left or right side of the Kapex. An anti-slip mechanism prevents the clamp from freely falling when not locked, keeping it out of the way while positioning material. Cam actuated lever lock.
Festool Kapex Hold-Down Clamp
|
 |
Posted in Festool, New Products | No Comments »
