Archive for the 'Dust Collection' Category
Sunday, September 25th, 2011
| 30 Micron Replacement Bag for Rockler Wall Mount Dust Collector |
30 Micron Replacement Bag
Keep the air in your shop environment clean and safe by replacing your Rockler Wall Mount Dust Collector’s original 30-Micron Bag! Heavy-duty cloth bag attaches easily and gives you 30 micron protection from dust particles caused by sawing, routing, drilling, and other shop duties.
30 Micron Replacement Bag for Rockler Wall Mount Dust Collector
|
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, September 25th, 2011
| New Dust Right® Wall Mount Dust Collector |
Heavy-duty performance meets out-of-the-way convenience. With a 650
CFM suction capacity and a 3/4 HP, 60 Hz, 110 Volt, 12 amp motor, this compact dust collector
handles serious shop messes without cluttering up your workspace. It mounts
in seconds with a simple Z-bracket. Plus, it’s portable! Just set
up a few Z-brackets around your shop or house to create dust-collection
stations
wherever you’re working. A comfortable foam-gripped handle makes
transportation and setup a breeze. The
motor features a sealed shaft and bearings for quiet, long lasting operation.
The inlet accepts 4″ hose. Comes standard with a 15 gallon, 30-micron bag. The optional 5-micron replacement bag offers the same size and capacity as the original, but with much finer particle retention. Both bags are made from heavy-duty cloth and attach easily.Includes one Z-bracket and mounting hardware. Additional Z-brackets sold
separately.
New Dust Right® Wall Mount Dust Collector
|
 |
Posted in Dust Collection, New Products | Comments Off
Friday, May 13th, 2011
| JET DC-1100VX-BK Vortex Dust Collector with 30-Micron Bag Filter Kit |
| Get the ultimate in dust collection with the JET Dust Collector with Canister Kit! Features the exclusive Vortex Cone™ technology which improves chip separation and prevents clogged filters for cleaner shop air! Features a 1-1/2 HP high air velocity fan-cooled motor that delivers a powerful dust-sucking air flow of 1100 cubic feet per minute, a 30-micron bag that captures 98% of 30-micron particles, a 5.3 cubic foot dust collection area with a snap ring for easy-on/off dust removal, dual dust ports, and four casters that offer maneuverability within the shop. And this JET Dust Collector is fairly quiet with a sound rating of just 70-80 dB, which is about as loud as a standard vacuum cleaner.
JET DC-1100VX-BK Vortex Dust Collector with 30-Micron Bag Filter Kit |
 |
Posted in Dust Collection, New Products | Comments Off
Friday, May 13th, 2011
| JET DC-1100VX-CK Vortex Dust Collector with 2-Micron Canister Filter Kit |
Get the ultimate in dust collection with the JET Dust Collector with Canister Kit! Features the exclusive Vortex Cone™ technology which improves chip separation and prevents clogged filters for cleaner shop air! Features a 1-1/2 HP high air velocity fan-cooled motor that delivers a powerful dust-sucking air flow of 1100 cubic feet per minute, a 2-micron pleated canister filter that captures 98% of 2-micron particles, a 5.3 cubic foot dust bag with a snap ring for easy-on/off dust removal, dual dust ports, and four casters that offer maneuverability within the shop. And this JET Dust Collector is fairly quiet with a sound rating of just 70-80 dB, which is about as loud as a standard vacuum cleaner.
JET DC-1100VX-CK Vortex Dust Collector with 2-Micron Canister Filter Kit |
 |
Posted in Dust Collection, New Products | Comments Off
Tuesday, May 10th, 2011
| One Micron Inner Bag Filter for Dust Right™ 1200 Air Filtration System |
Keep your shop air clean and your Dust Right™ 1200 Air Filtration System running smoothly with regularly scheduled filter replacements. Also fits Jet AFS-1000B.
One micron ”three pouch” bag filter delivers 99% efficiency for safe clean air
Replace every 12 months.
12” x 24”
One Micron Inner Bag Filter for Dust Right™ 1200 Air Filtration System |
 |
Posted in Dust Collection, New Products | Comments Off
Tuesday, May 10th, 2011
| Five Micron Outer Filter for Air Filtration Systems |
Breathe easy with regularly scheduled filter replacements on your Dust Right™ 1200 Air Filtration System and Jet AFS-1000B!
Five micron filter uses synthetic webbing to trap harmful airborne dust Prevents dust from circulating in the air and getting into your lungs
Replace every 4 months
Disposable Electrostatic
12” x 24”
Five Micron Outer Filter for Air Filtration Systems |
 |
Posted in Dust Collection, New Products | Comments Off
Monday, April 4th, 2011
| Shop-Vac 5HP 5-Gallon Wall Mounted Wet/Dry Vac – 9520210 |
| Hang the Shop-Vac 5.0 Peak Horsepower Hang Up® 5-Gallon Wet/Dry Vacuum on any wall for industrial suction power! Ideal for your garage, shop, mudroom, or anywhere floor space is a premium. Includes an easy on/off wall mounting bracket for easy on-the-job maintenance and an efficient cartridge type filter with foam sleeve. The 18-ft. x 1-1/2” Lock-On® hose helps you clean every corner of your shop, while an assortment of attachments give you even more cleaning options. Plus, you’ll increase the efficiency and double the holding capacity of the Shop-Vac when you use it with the Dust Right Vortex™ Dust Separator (sold separately, #40530)!
Shop-Vac 5HP 5-Gallon Wall Mounted Wet/Dry Vac – 9520210 |
 |
Posted in Dust Collection, New Products | Comments Off
Monday, October 25th, 2010
| Dust Right ™ 1200 Air Filtration System |
| With three speeds, up to 1185 CFM and over two dozen full changes of air per hour in a 20′ x 20′ x 8′ room, this system will have you breathing easy with the confidence that the air in your shop is clear. Superior two-stage filtration stops up to 98% of 5 micron particles, and up to 85% of 1 micron particles. Built to handle continuous operation, the built-in timer can also be set for 2, 4, 6 and 8 hour intervals to clean the air in your absence. The system can be hung from the ceiling joists to save space, and is easy to operate with the hand-held remote control.
Dust Right ™ 1200 Air Filtration System |
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, October 24th, 2010
| Dust Right™ 4” Hose Port |
Connect 4″ hose to your Dust Right™ Handle with ease! Simply insert the small
port end into 4″ hose and secure with a clamp. Dust Right™ Handle connects
to the larger end. Dust Right™ handle, hose and clamps sold separately.
Dust Right™ 4” Hose Port |
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, October 24th, 2010
| Dust Right 4” Elbow Tool Port |
| Get dust around corners without compromising power or efficiency. The rubber boot provides a tight seal around your dust collection system input as well as to any 4″ hose, giving you a leak-free portal toward a cleaner shop. Includes two metal hose clamps Dust Right 4” Elbow Tool Port |
 |
Posted in Dust Collection, New Products | Comments Off
Friday, October 1st, 2010
| 4” Dust Separator Components |
Separate large wood chips out of your system before they reach your dust collector. Two pair of plastic elbow and coupler components serve as infeed and outfeed points when you install them on either end of a box, bin or other fixture you wish to use to catch large wood chips. This system will save wear and tear on your dust collector and you won’t have to empty it as often. The two coupler components fit standard 4″ dust hose as well as the Dust Right™ Handle system (22643, sold separately).
4” Dust Separator Components |
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, September 12th, 2010
| Shop-Vac Quiet Plus, 12-Gallon |
With 4.5 HP and a 12 gallon tank, this vac can put away the dust without so much
as a hiccup. The single-stage bypass motor combines power and quiet operation, and
coupled with a durable poly tank, anti-tip casters, a top handle and extra-large lid
latches for easy emptying, it makes an excellent all-around vac for the shop, house or
car. Includes 6′ x 1-1/4″ hose, three 1-1/4″ extension wands, 10″ nozzle, foam sleeve
and reusable dry disc filter.
Shop-Vac Quiet Plus, 12-Gallon |
 |
Posted in Dust Collection, New Products | Comments Off
