Archive for the 'Clamps' Category
Tuesday, September 27th, 2011
| Bessey® Auto-Adjust Inline Toggle Clamp – 1” |
Speed up your setup time and hold down gripping power with Bessey Auto-Adjust Toggle Clamps! These truly versatile clamps automatically adjust to your work and are ideal for jigs, short runs, and quick-set ups. Other than a one-time clamping force setting, no manual adjustments are necessary; simply put your work in place and clamp down using the comfortable handle. Clamping force is adjustable from 25 to 550 lbs. Plastic caps prevent marring. The perfect addition to your work bench, the Bessey Auto-Adjust Toggle Clamp is easily mountable to your work bench using 1/4” or M6 fasteners.
Bessey® Auto-Adjust Inline Toggle Clamp – 1”
|
 |
Posted in Clamps, New Products | Comments Off
Tuesday, September 27th, 2011
| Bessey® Auto-Adjust Toggle Clamp |
| Speed up your setup time and hold down gripping power with Bessey Auto-Adjust Toggle Clamps! These truly versatile clamps automatically adjust to your work and are ideal for jigs, short runs, and quick-set ups. Other than a one-time clamping force setting, no manual adjustments are necessary; simply put your work in place and clamp down using the comfortable handle. Clamping force is adjustable from 25 to 550 lbs. Plastic caps prevent marring. The perfect addition to your work bench, the Bessey Auto-Adjust Toggle Clamp is easily mountable to your work bench using 1/4” or M6 fasteners. Choose from two horizontal clamps with 2” or 2-3/4” openings.
Bessey® Auto-Adjust Toggle Clamp
|
 |
Posted in Clamps, New Products | Comments Off
Wednesday, May 11th, 2011
| Irwin 90 Degree Angle Clamp |
| Get a true Right Angle joint every time! This Irwin 90 Degree Angle Clamp is excellent for corner clamping materials up to 3” thick, and acts as a third hand to hold the joint tight while you join it using glue, screws, or nails. Shown with optional Universal Fence Clamp sold separately.
Irwin 90 Degree Angle Clamp |
 |
Posted in Clamps, New Products | Comments Off
Thursday, November 18th, 2010
| Sure-Foot Aluminum Bar Clamp 4-Pack |
| Rockler’s exclusive design features an extra-wide 2-1/2″ foot for exceptional stability and higher base that raises bar 1-1/2″ above the table for excellent handle clearance.
Includes:
Two 48” Sure-Foot Aluminum Bar Clamps
Two 24” Sure-Foot Aluminum Bar Clamp
Sure-Foot Aluminum Bar Clamp 4-Pack |
 |
Posted in Clamps, New Products | Comments Off
Monday, September 27th, 2010
| 3-Way Face Clamp |
These exceptionally adjustable clamps are especially well-suited for clamping face
frames to the cabinet carcass, and for edging shelves. Since they clamp to the front
edge of the panels, the sky is the limit when it comes to cabinet depth, and they’ll work
even when the cabinet back is already attached. With quick-release acme threads, it’s
easy to adjust the clamp to wrap around wide stiles, whether the panel is flush with
the edge of the frame or not. Non-marring pads ensure you won’t dent the frames in
the process. Light weight and compact, they’re easy to move around and store. Clamp
opens enough to clear a 5″ wide frame (panel centered) or 3″ wide frame (panel flush
with edge). Patent Pending.
3-Way Face Clamp |
 |
Posted in Clamps, New Products | Comments Off
Saturday, August 7th, 2010
| F-Style Clamp Rack |
A compact solution to a sprawling problem! This new rack from Rockler herds your F-clamps together and mounts them firmly to the wall or to the Pack Rack (21834, sold separately) so your clamps are where you need them, when you need them. Pre-drilled holes are 16″ on center for simple mounting to wall studs; slotted holes line up with the Pack Rack. Constructed of sturdy galvanized steel for a lifetime of service. 24-3/8″
overall length.
F-Style Clamp Rack |
 |
Posted in Clamps, New Products | Comments Off
Saturday, August 7th, 2010
| Pipe Clamp Rack |
Put an end to that pile of clamps leaned up in the corner! This new rack from Rockler puts your pipes firmly on the wall or on the Pack Rack (21834, sold separately) so you’ll never have to hear them clatter on the concrete again. Nine slots are sized to accept pipe clamps or aluminum bar clamps, so the choice is yours. Pre-drilled holes are 16″ on center for simple mountingto wall studs; slotted holes line up with the Pack Rack.
Constructed of sturdy galvanized steel for a lifetime of service. 24-5/8″ overall length.
Pipe Clamp Rack |
 |
Posted in Clamps, New Products | Comments Off
Friday, August 6th, 2010
| Irwin 4” Handi-Clamp |
| When you reach for a clamp in the middle of a glue-up, you rarely have more than one hand to spare. That’s what makes the Irwin Handi-Clamp a standout: true one-handed engagement with the patented ratcheting mechanism, and one-handed release with the quick-release trigger. And unlike a spring clamp, the Handi-Clamp allows you to vary the clamping pressure according to the application—it only squeezes as hard as you do. Throw in high-tech featherweight polymer construction, vise-like clamping power and pivoting clamping pads for odd-shaped workpieces and you have a recipe for a workshop favorite. Simply slide into position, squeeze and you’re done. 4″ clamping capacity. 3″ throat depth.
Irwin 4” Handi-Clamp |
 |
Posted in Clamps, New Products | Comments Off
Wednesday, August 4th, 2010
| Box Joint Jig Cauls |
Make perfect joints with our Box Joint Jig and NEW Cauls!Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Simply align the pressure points with box joint fingers and tighten in place with one or more Band Clamps (60545, sold separately).
Slots on the outside of the cauls are made to hold pennies firmly in place to support your Band Clamps at varying heights. Plastic cauls stand 6-1/4″ (1/4″ Cauls), 6-3/8″ (3/8″ Cauls) and 6-1/2″ (1/2″ Cauls) tall. Four Cauls per pack. Patent pending.
Box Joint Jig Cauls
|
 |
Posted in Clamps, New Products | Comments Off
Friday, June 4th, 2010
| All In One 99” Contractor Wide Clamp |
Wide lever handle and a click-lock sliding jaw make it simple to position and secure this clamp for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. 99″ length makes it a snap to rip sheets of plywood and other large materials. A very low 9/16″ body profile and flat top allow many applications without obstructing tools. Easy-to-read full color measuring scales enable outstanding accuracy anywhere along the clamp. Onboard T-Tracks fit select clamp accessories, sold separately. Rigid, lightweight construction makes this clamp a joy to operate. 2-17/32″ wide. This is a “C” Contractor Series Clamp.
All In One 99” Contractor Wide Clamp
|
 |
Posted in Clamps, New Products | Comments Off
Tuesday, June 1st, 2010
| All In One Contractor Stop Block |
Works with Contractor Clamps (sold separately) to provide a stop for your circular saw or router when using the clamp as a guide. Plastic housing fits the T-Tracks of the Contractor Clamps and a wing nut tightens to secure the block in place at the desired position along the clamp.
All In One Contractor Stop Block
|
 |
Posted in Clamps, New Products | Comments Off
Wednesday, May 5th, 2010
| Jawhorse Foldable Plywood Jaw |
Extend the powerful clamping capabilities of your Jawhorse RK9000 Workbench System(23723, sold separately) to hold plywood and other sheet materials up to 52″ wide. Outrigger supports are required for sheets up to 48″ wide, and outriggers with legs are needed for sheets wider than 48″. The jaw comes with brackets to easily make outrigger supports using basic 2 x 4 lumber (not included).
Jawhorse Foldable Plywood Jaw
|
 |
Posted in Clamps, New Products | Comments Off
