| Plastic Wire Bushings | |
| Mount these bushings after drilling through drywall to feed low-voltage cables and wires through the wall smoothly for a simple and organized look. Bushings finish cut drywall edges and prevent crumbling when cables are pulled through or adjusted. Available in three sizes, as listed. |
 |
| FastCap ProCarpenter Flatback PS-16 Tape Measure | |
| The ProCarpenter Old Standby 16′ stainless steel tape is 7/8” wide and sits flat on surfaces to measure curves and flat panels precisely and easily. Features easy-to-read standard measurements to 1/16” with markings across the entire width of the blade, dual thumb and finger locks, belt clip, rubber casing, and the side is an erasable note pad (for pencil only). |
 |
| Closet Hardware | |
| Stout, sturdy and stylish, metal closet hardware will meet your needs for an up-to-date solution for hanging clothing in your closets. Rods mount with flanges and brackets on each end (both sold separately). A center support bracket is recommended to maximize the weight each rod will hold. Hollow rods are 1-1/4″ in diameter. 1/16″ metal. High grade steel brackets support rods up to 1-1/2″ in diameter and shelves up to 12″ deep. Flange Sets come in finishes to match rods and brackets and include flange, collet and mounting screws. |
 |
| Mini Eliminator Hollowing Tool | |
| Two flat sides on the tool shank make the eliminator function as both a left and a right hollowing and detailing tool. Flat sides on the 1/2” shank ensure that the 1/4” Nano-Carbide cutter will always be stable on your tool rest at the optimal angle to produce a clean, tear-free surface on all types of wood, regardless of grain orientation. Cutter stays sharp for up to 100 hours of smooth, clean turning and impressive surface detail work. 1/4” Replacement Cutter (34050) sold separately. Compatible with the Sorby 16” Sovereign Handle or turn your own handle. |
 |
| Eliminator Non-Handled Hollowing Tool | |
| Two flat sides on the tool shank make the eliminator function as both a left and a right hollowing tool. Flat sides on the 3/4” shank ensure that the 3/8” Nano-Carbide cutter will always be stable on your tool rest at the optimal angle to produce a clean, tear-free surface on all types of wood, regardless of grain orientation. Cutter stays sharp for up to 100 hours of smooth, clean turning. 3/8” Replacement Cutter (33933) sold separately. Compatible with the Sorby 16” Sovereign Handle or turn your own handle. |
 |
| Sorby 16” Sovereign Handle | |
| Use a wide variety of turning tools with this seamless 16” steel handle. The high grade aluminum head and base help dampen vibration and the Softex grip make this handle the ultimate in comfort. Tool shanks of up to 5/8” in diameter are held in place by brass-tipped set screws to prevent damage. Handle is hollow and end cap unscrews to allow addition of lead shot for extra weight to provide greater control of your tools. Includes allen wrenches and collet adapters for 1/2” and 3/8” diameter tools. Made in England. |
 |
| Nicholson 8” Machete File | |
| File down rough or sharp edges or shape tool edges with this high quality triangular file. Edges taper slightly toward the end for use in corners and more. Made in the USA. |
 |
| Flexible Scraper for SoniCrafter RW9114 | |
| This two-piece stainless steel scraper blade is ideal for removing elastic sealants, paint, adhesive residues and carpeting. |
 |
| Rigid Scraper for SoniCrafter RW9113 | |
| Ideal for removing old caulking around tubs and sinks, old vinyl, wood or other floor coverings, paints and coatings, residues and separating laminated layers. Also cuts carpet. |
 |
| Cleaning Block for SoniCrafter RW9129 | |
| Use to clean SoniCrafter™ carbide grit and diamond coated accessories. |
 |
| Carbide Rasp (Finger Shaped) for Sonicrafter RW9117 | |
| Ideal for coarse grinding, rasping or aggressive material removal of wood, hardened adhesives, masonry and more in small, narrow areas. |
 |
| Triangular Carbide Rasp for SoniCrafter RW9116 | |
| Ideal for coarse grinding, rasping or aggressive material removal of wood, hardened adhesives, masonry and more in small, tight areas. |
 |
You are currently browsing the KS Woodwork Blog weblog archives for December, 2009.
Subscribe to KS Woodowork Feed
Subscribe to KS Woodwork Blog by Email
