Archive for March, 2009
Saturday, March 14th, 2009
| Pro Tapered Countersink Bits Set with FREE #10 and #12 Replacement Bits |
The cleanest-cutting countersinks available! Two ultra-deep flutes clear chips with remarkable efficiency and leave a perfectly clean rim, even in delicate veneers. Tapered pilot bits are fully adjustable and replaceable, and feature a flattened shank for a no-slip connection to the countersink. Each bit also includes an adjustable stop collar and a hex wrench for all adjustments. The 3 Piece Pro Tapered Countersink Bit Set includes complete countersinks for #6, #8 and #10 screws, 3 stop collars and 2 hex wrenches, all in an attractive wooden case. 3/8″ shank. Hardened chrome molybdenum steel.
Order today and get the #10 and #12 Pro Tapered Pilot Replacement Bits for FREE! ($19.98 Value!). Hurry, offer valid while supplies last. This offer is available only online!
Pro Tapered Countersink Bits Set with FREE #10 and #12 Replacement Bits
|
 |
Posted in New Products | Comments Off
Friday, March 13th, 2009
| Incra Miter 1000HD Miter Gauge |
Achieve absolute precision at any angle! This high definition gauge has 180 positive
stops for pin-point accuracy at every degree (with special stops at +/-22.5°), plus a
micro-adjustable vernier scale for fine-tuning to 1/10°. Add to that the industry’s
smoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip stop,
and superior duplicating ability, and you’ve got a can’t-miss solution for better
results.
Incra Miter 1000HD Miter Gauge
|
 |
Posted in New Products | Comments Off
Friday, March 13th, 2009
| Jet 90 Degree Corner Clamp, While Supplies Last! |
These precision-machined clamps will hold both miter and butt joints at a
true 90º for easy and accurate assembly. Ideal for picture frames, door
frames, and more! 3″ width capacity.
Jet 90 Degree Corner Clamp, While Supplies Last!
|
 |
Posted in Clamps, On Sale | Comments Off
Thursday, March 12th, 2009
| Painters Tape with FREE Dispenser |
A true shop essential! This classic blue tape comes in handy for project after project,
helping you guard against stain, bind workpieces together, prevent messy glue drip,
and more. It peels off cleanly for up to 14 days, and features an easy-rip applicator
to tape against corners in one smooth motion. 60-yard roll. Medium tack.
Painters Tape with FREE Dispenser
|
 |
Posted in Glue & Finishes, New Products | Comments Off
Thursday, March 12th, 2009
| Box Joint Jig DVD |
| Instructional DVD shows you step by step how to use the Woodsmith Aluminum Box Joint Jig to make quick and easy box joints on your table saw. Includes box joint tips and techniques and a troubleshooting guide.
Box Joint Jig DVD
|
 |
Posted in New Products, Videos | Comments Off
Wednesday, March 11th, 2009
Posted in New Products | Comments Off
Wednesday, March 11th, 2009
| Rockler Router Table Steel Stand – Upper Steel Attachment |
This heavy-gauge steel attachment secures easily to the Rockler Steel Stand (68834),
providing a stable frame for convenient tool storage above your router table. Its
flanged cross members support everything from pegboard panels to shallow cabinets.
Rockler Router Table Steel Stand – Upper Steel Attachment
|
 |
Posted in New Products | 1 Comment »
Tuesday, March 10th, 2009
| Rockler Cross Cut Sled Cutoff Platform |
This sled accessory secures to smaller table saws, providing zero-clearance workpiece
support for safe, splinter-free cuts. The 1/2” thick MDF platform features a smoothsliding
melamine surface and a locking aluminum miter bar. Use only with our
Crosscut Sled for Portable Table Saws.
Rockler Cross Cut Sled Cutoff Platform
|
 |
Posted in New Products | Comments Off
Tuesday, March 10th, 2009
| Rockler Portable Cross Cut Sled |
This scaled-down version of our full-sized sled fits onto smaller table saws for precise
cuts wherever you’re working. A large protractor scale at the end of the fence lets
you precisely tune angles for air-tight miters and crosscuts – no more squinting.
Features smooth-sliding no-slop ball bearings, a solid aluminum fence, flip-down stop,
and more.
Rockler Portable Cross Cut Sled
|
 |
Posted in New Products | Comments Off
Monday, March 9th, 2009
| Fein MultiMaster Table and Drill Jig Support |
The Table and Drill Stand Support is perfect for precision cut-outs; use it to clamp the Fein Multimaster to a table or 1-3/4” workbench. It can also be clamped to commercially available drill stands with a 43 mm collar diameter. Note: Only suitable for the Fein Multimaster FMM 250/250Q.
Fein MultiMaster Table and Drill Jig Support
|
 |
Posted in Fein, New Products | Comments Off
Monday, March 9th, 2009
| Fein MultiMaster Mini Carbide File, 2-pack |
| The Mini Carbide File for Fein MultiMaster is used for filing out recesses and for deburring work. Fits on Minicut and File Set. 2-pack.
Fein MultiMaster Mini Carbide File, 2-pack
|
 |
Posted in Fein, New Products | Comments Off
Sunday, March 8th, 2009
| 12 Foot Grip Lock Tape Measure |
This 12′ x 5/8” tape measure features a convenient bottom pause button that holds the blade firmly in place.
12 Foot Grip Lock Tape Measure
|
 |
Posted in New Products | Comments Off
