Archive for March, 2009
Wednesday, March 25th, 2009
| Jet JBTS-10MJS, 10” Jobsite Table Saw w/ Stand |
| If you’re looking for a jobsite saw that’s both powerful and portable, look no further than the all-new JET® B3NCH 10″ Jobsite Table Saw with stand. This table saw features a 15 Amp soft start motor, 25″ right rip capacity, a riving knife and anti-kickback pawls for added safety, and a heavy-duty folding stand with wheels for quick setup and portability. Weighing in at just under 100lbs, this powerhouse brings the stability of a stationary table saw to your jobsite, then rolls away when you’re done.
Easy folding stand for convenient storage, quick setup and portability on the job site
Rubber hand grips on each end of the table allow you to conveniently carry without stand
Unique base design allows for adequate tool storage on the job site
Heavy Duty 15 Amp motor with soft start
Large telescoping extension wing provides a wide 25” ripping capacity
Unique dust shroud design enhances dust and chip removal
Aluminum extruded rails ensure a square fence and sliding precision
Rear extension provides out feed support and keeps the work piece flat
New riving knife system complies with UL standards and prevents kickback
Convenient push button arbor lock allows for easy and quick blade change
Quick-lock fence slides smoothly and locks securely for accurate cuts
3 Year Warranty
Brochure
Jet JBTS-10MJS, 10” Jobsite Table Saw w/ Stand
|
 |
Posted in New Products | Comments Off
Wednesday, March 25th, 2009
| Jet JWBS-10OS, 10” Band Saw w/ Stand |
| Introducing the all new JET® B3NCH 10″ Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily adjustible LED worklight – this precision bandsaw has all the features you’re used to on bigger bandsaws, in a powerful, mobile package.
Compact benchtop design allows for easy transport to different shop locations
Rigid steel stand allows bandsaw to transition from the benchtop to the floor
Reinforced steel base can be bolted to stand or work bench
Heavy Duty 1/2 HP induction motor for various cutting applications
Poly-V drive system maximizes power transfer from motor to blade and reduces vibration
Upper and lower ball bearing blade guides provide stability for heavy loads
Extra large cast iron table with retractable extension wing provides additional work piece support
One piece welded frame design reduces machine vibration and flex
Oversized, ergonomic knobs provide ease of use and maximum control
Quick release blade tension makes changing and re-tensioning the blade fast, easy and consistent
Flexible LED light provides visibility without blocking line of sight
Aluminum extruded fence ensures smooth sliding action and straight, precise cuts
Table tilting trunnion allows working angles from 0° to 45°
Magnifying cursor enlarges measurement scale for precise fence location
Rack and pinion blade guide adjustment with integrated locking knob for precise height control
Blade site window to view blade tracking
3 Year Warranty
Brochure
Jet JWBS-10OS, 10” Band Saw w/ Stand
|
 |
Posted in New Products | Comments Off
Tuesday, March 24th, 2009
| Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50” Rip with Downdraft Table and Leg Set |
EXCLUSIVE commercial XACTA® Fence II with T-square design
JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
Quick release riving knife greatly reduces binding/kickback risk
Push button arbor lock (patent pending) for rapid blade change
Shrouded Blade increases dust collection efficiency
Standard 11” left and right cast iron extension wings provides the largest table surface in its class
Poly-V drive belt system delivers efficient, quiet operation
Rail-mounted magnetic switch is easy to reach and provides overload protection
Enclosed cabinet with built-in sealed storage drawer
Hinged motor cover on cabinet gives quick access to the motor and belts
Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning
5 Year Warranty
Brochure
Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50” Rip with Downdraft Table and Leg Set
|
 |
Posted in New Products | Comments Off
Tuesday, March 24th, 2009
| Jet Deluxe Xacta Saw 5HP, 1Ph, 50” Rip, with Downdraft Table and Leg Set |
EXCLUSIVE Commercial XACTA® Fence II with T-square design
Quick release riving knife greatly reduces binding/kickback risk
JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
Push button arbor lock (patent pending) for rapid blade change
Shrouded Blade increases dust collection efficiency
Standard 11” left and right cast iron extension wings provides the largest table surface in its class
Poly-V drive belt system delivers efficient, quiet operation
Rail-mounted magnetic switch is easy to reach and provides overload protection
Enclosed cabinet with built-in sealed storage drawer
Hinged motor cover on cabinet gives quick access to the motor and belts
Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning
5 Year Warranty
Brochure
Jet Deluxe Xacta Saw 5HP, 1Ph, 50” Rip, with Downdraft Table and Leg Set
|
 |
Posted in New Products | Comments Off
Monday, March 23rd, 2009
| Jet Xacta Saw 3HP, 1Ph, 50” Rip with Downdraft Table and Leg Set |
EXCLUSIVE commercial XACTA® Fence II with T-square design
JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
Cast iron wings to increase work surface and support area
Three matched V-belts deliver full power to the blade
Rail-mounted magnetic switch is easy to reach and provides overload protection
Hinged motor cover on cabinet gives quick access to the motor and belts
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
One-piece closed stand channels dust through a 4” port for fast, clean dust collection
See-through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut
Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
Miter gauge with adjustable positive stops for accurate mitering
Powder coated paint for a long-lasting, chip-resistant finish
5 Year Warranty
Brochure
Jet Xacta Saw 3HP, 1Ph, 50” Rip with Downdraft Table and Leg Set
|
 |
Posted in New Products | Comments Off
Monday, March 23rd, 2009
| Jet Proshop 10”, 1-3/4HP, 52”, CW with Downdraft Table & Leg Set |
EXCLUSIVE ProShop fence system with T-square design
Integrated arbor lock allows for quick, safe and easy blade changes
JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
Heavy-duty cast iron table with T-style miter slot provides large flat work surface and increased cross cut capacity
Enclosed cabinet with EXCLUSIVE leg stand design for easy assembly
4” dust port for increased dust collection efficiency
Rigid, left tilting cast iron trunnion
Powder coated paint for a long-lasting, chip-resistant finish
Steel extension wings for added workpiece support
5 Year Warranty
Brochure
Jet Proshop 10”, 1-3/4HP, 52”, CW with Downdraft Table & Leg Set
|
 |
Posted in New Products | Comments Off
Sunday, March 22nd, 2009
| Jet Proshop 10”, 1-3/4HP, 52”, SW with Downdraft Table & Leg Set |
EXCLUSIVE ProShop fence system with T-square design
Integrated arbor lock allows for quick, safe and easy blade changes
JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
Heavy-duty cast iron table with T-style miter slot provides large flat work surface and increased cross cut capacity
Enclosed cabinet with EXCLUSIVE leg stand design for easy assembly
4” dust port for increased dust collection efficiency
Rigid, left tilting cast iron trunnion
Powder coated paint for a long-lasting, chip-resistant finish
Steel extension wings for added workpiece support
5 Year Warranty
Brochure
Jet Proshop 10”, 1-3/4HP, 52”, SW with Downdraft Table & Leg Set
|
 |
Posted in New Products | Comments Off
Sunday, March 22nd, 2009
| JWS-25X, JET Shaper, 3HP, 1PH |
| The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.
Two-speeds let you select the best speed and torque for different cutter diameters
Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
Large 25” X 25-1/2” precision ground cast iron table provides a durable work area
Poly-V-belt transfers maximum power to the spindle
Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Reversible spindle speeds for diverse shaping jobs
Powerful 3HP, 1Ph motor with magnetic controls
Starting pins for irregular shaping
Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
4” Dust port built into fence for convenient hookup to any dust collection system
Spindle lock for safe and easy cutter set up
Spindle height scale
5 Year Warranty
Brochure
JWS-25X, JET Shaper, 3HP, 1PH
|
 |
Posted in New Products | Comments Off
Saturday, March 21st, 2009
| KC Wire Burners |
| Add crisp detail to your turnings! These unique tools etch out precise decorative lines in all types of wood. Three sets available. Use the 6” Set for pens and other small turnings, the 9” Set for long spindles, and the 18” Set for bowls and other faceplate work. Each package includes three burners with wires of varying thickness.
KC Wire Burners
|
 |
Posted in New Products, Woodturning | Comments Off
Saturday, March 21st, 2009
| Jet 22-44 Pro Drum Sander 3HP, 1Ph, DRO, Tables and Casters |
| The new JET model 22-44 PRO-3 – Drum Sander has even more great features. We’ve added a digital readout that displays the exact thickness of the finished piece or allows the user to preset the exact thickness they want for the finished piece. Four casters mobilize your drum sander and also lock into place for stability during use. Both infeed and outfeed tables come standard with the 22-44 PRO-3 and provide extra support for the workpiece. The powerful 3HP motor is designed for heavier use for longer periods of time.
Our EXCLUSIVE SandSmart™ Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
Patented conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
22” wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance
Sealed and permanently lubricated drum ball bearings for longer life
Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
Adjustable drum height and downward pressure feature virtually eliminates snipe
Large cast-iron handwheel adjusts height at 3/32” per turn for precise sanding thickness control
Patented abrasive take-up fasteners make changing abrasives quick and easy
Depth gauge has locking stop to ensure accuracy
On/off switch with overload protection is front-mounted for operator’s convenience
One feed and one drive motor for superior sanding control
Continuous-duty, 3HP motor is designed for heavier use for longer periods of time
DRO for more accurate sanding
5 Year Warranty
Brochure
Jet 22-44 Pro Drum Sander 3HP, 1Ph, DRO, Tables and Casters
|
 |
Posted in New Products | Comments Off
Saturday, March 21st, 2009
| Jet 22-44 Oscillating Drum Sander Kit with Closed Stand |
| The new model 22-44 OSC Drum Sander has an exclusive oscillating feature, with the push of a button the 22-44OSC sander can be operated as a simple sander or as an oscillating sander. When operating as a linear sander, the sander drum rotates as the conveyor feeds the workpiece through. When in the oscillating mode, in addition to the linear sanding operation, the sanding drum head oscillates from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Additional features include a built-in cabinet door for easy access to storage, patented conveyor TRACKERS™ that reduce the need for manual belt adjustments and our Exclusive SandSmart™ infinitely variable feed control that produces the ultimate finish to your woodworking project.
Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning
Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute
Patented conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
Sealed and permanently lubricated drum ball bearings for longer life
Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
Adjustable drum height and downward pressure feature virtually eliminates snipe
Large cast-iron handwheel adjusts height at 3/32” per turn for precise sanding thickness control
Patented abrasive take-up fasteners make changing abrasives quick and easy
Depth gauge has locking stop to ensure accuracy
On/off switch with overload protection is front-mounted for operator’s convenience
One feed and one drive motor for superior sanding control
Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
Our EXCLUSIVE SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
1” of oscillating stroke
5 Year Warranty
Brochure
Jet 22-44 Oscillating Drum Sander Kit with Closed Stand
|
 |
Posted in New Products | Comments Off
Friday, March 20th, 2009
| The Pocket Hole Drilling Jig Book |
Learn how to use this time-saving tool to create durable joints without clamps or special fasteners in a range of stunning furniture projects.
The Pocket Hole Drilling Jig Book
|
 |
Posted in Book Reviews, New Products | Comments Off
