Archive for August, 2008
Wednesday, August 20th, 2008
| Kreg 1-1/4” X 7 Washer Screws, 500 Count Box |
Kreg self-tapping screws are specially designed for Pocket-Screw Joinery. They feature a self-tapping auger point that eliminates pre-drilling and a flat head that seats flushly in the bottom of the Pocket-Hole. All of our screws utilize a #2 square drive recess. The deep recess of the square drive provides positive driver engagement to reduce cam-out. Like every Kreg product, our screws are manufactured from the highest quality materials. To manufacture a virtually unbreakable screw, industrial quality steel is first case-hardened and then coated with a dri-lube finish which reduces driving torque and gives them their bronze appearance. Maxi-LocTM Fine Thread – This is the standard screw for hardwood to hardwood applications. Large washer head provides a superior hold in the bottom of the pocket. 1-1/4″ Long, #7, Fine Thread Screw – 500 count
Kreg 1-1/4” X 7 Washer Screws, 500 Count Box
|
 |
Posted in Kreg, New Products | Comments Off
Wednesday, August 20th, 2008
| Ma-12 Carving Mallet |
The “Wood is Good” line of quiet mallets is guaranteed unbreakable. The heads are made of a tough urethane material designed to be quiet and yet able to transmit the maximum blow to the tool. The handles are beautifully turned out of selected, premium New England Hardwoods. They are polish sanded. The 12 ounce mallet uses our small urethane head of 2 3/4″ diameter.
Ma-12 Carving Mallet
|
 |
Posted in New Products | Comments Off
Tuesday, August 19th, 2008
| Individual Forstner Bits |
The top pick for smooth, flat-bottomed holes with no tearout. Outer cutting
edge slices through the perimeter for a clean finish every time. Perfect for
doweling, mortising, pocket holes, hardware installation and more! Choose
from dozens of sizes.
Presharpened high speed steel (HSS) bits are ready to use in any type of
wood
Exceptionally smooth sidewalls
and no surface tear-out
3/8” shank.
Individual Forstner Bits
|
 |
Posted in New Products | Comments Off
Tuesday, August 19th, 2008
| Wall Mount Dust Collector |
Heavy-duty performance meets out-of-the-way convenience. With a 650
CFM suction capacity and a 3/4 HP, 60 Hz, 110 Volt, 12 amp motor, this rig
handles serious shop messes without cluttering up your workspace. It mounts
in seconds with a simple Z-bracket. Plus, it’s portable! Just set
up a few Z-brackets around your shop or house to create dust-collection stations
wherever you’re working. A comfortable foam-gripped handle makes
transportation and setup a breeze. And at only 50 lbs., it’s not unwieldy. A
30-micron cloth bag keeps even the smallest particles in check, and the
motor features a sealed shaft and bearings for quiet, long lasting operation.
The inlet accepts 4″ hose. Includes one Z-bracket and mounting hardware. Additional Z-brackets sold separately.
Wall Mount Dust Collector
|
 |
Posted in Dust Collection, New Products | Comments Off
Tuesday, August 19th, 2008
| Nordfab QF Pipe |
This pipe is the backbone of the Quick-Fit ducting system, a truly incredible
alternative to traditional dust collection systems. The 3″ diameter pipe is
made from 23-gauge galvanizes steel and is built with lock-form seam
construction. All other sizes (ranging from 4″ to 6″ in diameter) are 22-gauge
galvanized steel and have laser welded seams. Every Quick-Fit pipe has rolled
ends for fast, tool-free connections with Quick-Fit clamps.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab QF Pipe
|
 |
Posted in Dust Collection, New Products | Comments Off
Monday, August 18th, 2008
| Nordfab In-Cut |
Start your Quick-Fit Ducting system by tapping into an existing line with this
simple component. Listed dimensions state both the diameter of the angled
hose fitting as well as the diameter pipe the In-Cut will fit.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab In-Cut
|
 |
Posted in Dust Collection, New Products | Comments Off
Monday, August 18th, 2008
| Nordfab End Caps |
Easily close off open taps in your dust collection network for optimal suction
power.
Listed dimension states the cap’s diameter.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab End Caps
|
 |
Posted in Dust Collection, New Products | Comments Off
Monday, August 18th, 2008
| Nordfab Reducer |
Wherever your Quick-Fit ducting system transitions between different sized
fittings or pipe, you’ll need a reducer. Select a model with the appropriate
diameter end-fittings to suit your needs.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab Reducer
|
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, August 17th, 2008
| Nordfab Manual Blast Gate |
Manually operated blast gate with a rugged cast aluminum body and standard
Quick-Fit connection. The listed dimensions state the
diameter of the gate’s hose fitting.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab Manual Blast Gate
|
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, August 17th, 2008
| Nordfab Router Hoods |
Every hood features a large 6″ x 12″ mouth for efficient dust collection.
Available with or without magnets. Edges are folded inside for safety. Listed
dimensions state the diameter of the hose fitting.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab Router Hoods
|
 |
Posted in Dust Collection, New Products | Comments Off
Sunday, August 17th, 2008
| Nordfab Radial Armsaw Hood |
A simple and effective solution for collecting dust from radial arm saws.
For each hood listed below, the given dimension states the diameter of the
duct fitting.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab Radial Armsaw Hood
|
 |
Posted in Dust Collection, New Products | Comments Off
Saturday, August 16th, 2008
| Nordfab T-Branch |
Made from 22-gauge galvanized steel, this branch merges three lines of your
dust collection system. Listed dimension states the diameter of all three
openings.
Note: One Quick-Fit clamp of appropriate diameter is required for every
connection
within your system. Click here to view the clamp offer (sold separately).
Nordfab T-Branch
|
 |
Posted in Dust Collection, New Products | Comments Off
