Archive for August, 2008
Sunday, August 31st, 2008
| Stanley Bailey Smoothing Plane #04 |
Bailey® Bench Plane Gray, cast-iron base with precision-ground sides and 9-3/4” long bottom
Durable epoxy coating provides long-lasting protectionHardened, tempered steel gives precision-ground cutter edge durabilityFully machined and polished double-iron cutter and lever Frog seat is machined for precise mouth adjustment Cutter adjusts for depth and alignment, offering precise control Solid-brass, cutter-adjustment knobQuick-release cam-lock makes iron removal easyKidney-shaped hole in lever cap helps secure cutter in placeContoured, polished high-impact polymer handles and knobs2” Wide Cutter
Stanley Bailey Smoothing Plane #04
|
 |
Posted in New Products | No Comments »
Sunday, August 31st, 2008
| Stanley Spokeshaves |
SpokeShave Flat BaseDesigned for curved work, such as shaping chair seats and legsCutters are fully adjustable for depth of cut and thickness of shavings Blades are replaceableComes with a vinyl pouch that protects plane when not in useProduct Length Cutter WidthSKU No. Inches mm Inches mm12-951 10 254 2-1/8 55
Stanley Spokeshaves
|
 |
Posted in New Products | No Comments »
Saturday, August 30th, 2008
| Bailey Jack Plane #05 by Stanley |
Fully ground cast iron bottom. 14” Long bottom. Machined perfectly true and flat. Adjustable mouth and cutter. Precision ground 2” wide cutter. Bailey plane made in England by Stanley.
Bailey Jack Plane #05 by Stanley
|
 |
Posted in New Products | No Comments »
Saturday, August 30th, 2008
| Bailey Block, Low Angle Plane #060 1/2 |
| Bailey® Block PlaneBailey® Block Plane Ideal for planing end grain and plastic materials12-920 block plane has a fully adjustable cutter resting at 21°13-1/2° low angle cutter on the 12-960 block plane keeps vibration to a minimum, creating a fine finishGray, cast-iron base with precision-ground sides and bottomFinger grips machined into sides make single-handed use easyHardened, tempered steel gives precision-ground cutter edge durabilityCutter adjusts for depth and alignment, offering precise controlDurable epoxy coating for long-lasting protection Quick-release cam-lock makes iron removal easy1-3/8” wide cutter, 6-1/4” long bed
Bailey Block, Low Angle Plane #060 1/2
|
 |
Posted in New Products | No Comments »
Saturday, August 30th, 2008
| Solid Brass and Chrome Desk Clock Kit |
This attractive timepiece makes a great accent for any desk. Of solid brass and polished chrome construction, it features a precision quartz movement. Includes the clock and arch, a battery and mounting screws. Create your own wood base. Pen Holder sold separately.
Solid Brass and Chrome Desk Clock Kit
|
 |
Posted in New Products, Woodworking Hardware | No Comments »
Friday, August 29th, 2008
| Combination Square |
This combination set is great for the woodworker and includes a mitre square head, center head, and protractor head — all on a 12″ stainless steel blade marked in both inch and metric measurements. The square head has a built-in spirit level that is viewable from the top, bottom, and sides. A small scribe is also located in the square head. This scribe screws into the storage spot, so there is less chance of it being lost. The protractor head allows any angle between 0° and 180° to be worked. The centering head makes it easy to find the center of round work, making it ideal for turners. All heads are removable and adjustable.
Combination Square
|
 |
Posted in New Products | No Comments »
Friday, August 29th, 2008
| Starrett 12” Combination Square, with Square Head |
Laroy Starrett invented the combination square in 1877 and it has become a basic tool for every craftsman and builder. The C11H series has a cast iron head with a handy spirit level and a hardened scriber. The blade is machine divided, hardened and tempered with a reversible lock bolt that allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This assures true alignment of the blade and head.
Starrett 12” Combination Square, with Square Head
|
 |
Posted in New Products | No Comments »
Thursday, August 28th, 2008
| Wall Mount Dust Collector |
Heavy-duty performance meets out-of-the-way convenience. With a 650
CFM suction capacity and a 3/4 HP, 60 Hz, 110 Volt, 12 amp motor, this rig
handles serious shop messes without cluttering up your workspace. It mounts
in seconds with a simple Z-bracket. Plus, it’s portable! Just set
up a few Z-brackets around your shop or house to create dust-collection stations
wherever you’re working. A comfortable foam-gripped handle makes
transportation and setup a breeze. And at only 50 lbs., it’s not unwieldy. A
30-micron cloth bag keeps even the smallest particles in check, and the
motor features a sealed shaft and bearings for quiet, long lasting operation.
The inlet accepts 4″ hose. Includes one Z-bracket and mounting hardware. Additional Z-brackets sold separately.
Wall Mount Dust Collector
|
 |
Posted in Dust Collection, New Products | No Comments »
Thursday, August 28th, 2008
| Veneer Trimmer |
Quickly and easily make perfectly clean, square cuts on PVC, melamine, polyester and veneer. This trimmer features double-sided blades and will cut strips up to 0.5 mm thick and 2″ wide. Simply place the end trimmer on the end of the panel and firmly press the lever down. You’ll get a high-quality cut on all corners of the board! Plastic body. Two (upper and lower) high speed steel blades.
Veneer Trimmer
|
 |
Posted in New Products | No Comments »
Wednesday, August 27th, 2008
| Foolproof Wood Finishing, Book |
If you love to build, but could use a tip or two on how to choose, use, and apply the perfect finish, this contemporary book is for you! In it, expert Teri Masachi demystifies the finishing process and helps you avoid costly and frustrating mistakes. You’ll learn step-by-step as you work your way through a series of easy-to-follow finishing exercises. Plus, you’ll get 20 “recipes” for creating timeless looks like Deep Antique Cherry and Nut Brown Mahogany. 191 pages. Illustrated. Copyright 2006.
Foolproof Wood Finishing, Book
|
 |
Posted in Book Reviews, Glue & Finishes, New Products | No Comments »
Wednesday, August 27th, 2008
| A Simple Varnish Finish, DVD |
With so many finishing options, it can be hard to know where to start. Still, there’s one easy finish that almost never disappoints: wiping varnish. In this DVD, professional woodworker Marc J. Spagnuolo (owner and developer of TheWoodWhisperer.com) shows you exactly how it’s done—from start to finish.
A Simple Varnish Finish, DVD
|
 |
Posted in Glue & Finishes, New Products, Videos | No Comments »
Tuesday, August 26th, 2008
| Violet Box Elder Burl Pen Blank |
Create a handsome, natural pen with beautiful figured burl. These blanks are
stabilized with resin to ensure smooth turning and can be polished to a
gleaming finish. Each blank is sold individually.
Violet Box Elder Burl Pen Blank
|
 |
Posted in New Products, Pen Turning Blanks | No Comments »
