Archive for July, 2008
Sunday, July 20th, 2008
| Festool MiterFast Angle Transfer Device |
The MiterFast is included as a standard component with the Kapex compound miter saw but can be purchased separately as a replacement unit. Used for transferring complex angles to the Kapex from inside or outside corner, the MiterFast has an aggressive locking mechanism and reflective surface aiding visibility of the Kapex dual lasers.
Festool MiterFast Angle Transfer Device
|
 |
Posted in Festool, New Products | Comments Off
Saturday, July 19th, 2008
| Festool Kapex Clamping Kit |
This kit can be used to secure the Kapex sliding compound miter saw to the Festool MFT/3 table. The bolts from the Clamping Kit drop through the top of the Kapex and the knobs are used to secure the Kapex in place on the under side of the MFT/3 perforated top plate. Sold in packs of two.
Festool Kapex Clamping Kit
|
 |
Posted in Festool, New Products | Comments Off
Saturday, July 19th, 2008
| Festool MFT/3 Kapex Table |
This multi-function table is designed specifically for use with the Kapex sliding compound miter saw. It features additional holes in the perforated top plate for positioning the feet of the Kapex and for mounting with clamps or the Kapex Mounting Kit. When combined with the standard MFT/3, the deck of the Kapex will match the height of the MFT/3 for additional material support.
Festool MFT/3 Kapex Table
|
 |
Posted in Festool, New Products | Comments Off
Friday, July 18th, 2008
| Festool Kapex Hold-Down Clamp |
This useful clamp is included with the Kapex compound miter saw but can be purchased separately as a replacement item. Used for securing material, it can attach on the left or right side of the Kapex. An anti-slip mechanism prevents the clamp from freely falling when not locked, keeping it out of the way while positioning material. Cam actuated lever lock.
Festool Kapex Hold-Down Clamp
|
 |
Posted in Festool, New Products | Comments Off
Friday, July 18th, 2008
| Festool Rapid Clamp and Fixed Jaws |
Used along with Festool guide rails, this package simplifies clamping and positioning. Includes fixed jaws as well as trigger-action clamping jaws.
Festool Rapid Clamp and Fixed Jaws
|
 |
Posted in Festool, New Products | Comments Off
Thursday, July 17th, 2008
| Festool MFT/3 Cross Members |
The optional Cross Members provide additional stability and torsional strength to the legs of the Mult-Function Table. Sold in packs of two.
Festool MFT/3 Cross Members
|
 |
Posted in Festool, New Products | Comments Off
Thursday, July 17th, 2008
| Festool MFT/3 Replacement Top |
This perforated top plate can be used to replace damage or worn out tops on MFT/3 multi-function tables.
Festool MFT/3 Replacement Top
|
 |
Posted in Festool, New Products | Comments Off
Wednesday, July 16th, 2008
| 3-Piece Countersink Bet Set for Log Tenon Cutters |
Use in log furniture construction to cut a precise 60º taper on the mortise–a perfect match when used in conjunction with the 60º tenon cutter–for a strong, beautiful joint. Drill a 1″, 1-1/2″, or 2″ diameter hole with a forstner bit, then use this countersink bit (with the appropriate guide bore) to create a perfectly shaped shoulder. Set includes the triangular blade, a 1″ diameter shaft, 1-1/2″ and 2″ guide bores, and an allen wrench for assembling the bit and changing bores. 1/2″ shank.
For use with 20398, 22076 and 23323 Log Tenon Cutters.
3-Piece Countersink Bet Set for Log Tenon Cutters
|
 |
Posted in New Products | Comments Off
Wednesday, July 16th, 2008
| Festool OF 2200 EB Accessory Kit |
| This kit features all the essential accessories for Festool’s OF 2200 EB router. It includes a parallel edge guide, a guide stop for attaching the router to a guide-rail system, two guide rods for adapting it to an edge guide or guide stop, a table widener base with an integrated dust hood, a small-bore base for use with small-diameter edge forming bits, a template guide base, an offset base for guide-rail use, and four imperial template guides (1/2″, 3/4″, 1″, and 1-3/8″). Everything in the kit stores neatly in the included Systainer #3 storage system.
Festool OF 2200 EB Accessory Kit
|
 |
Posted in Festool, New Products | Comments Off
Tuesday, July 15th, 2008
| Confetti Lamp Inserts |
| These 1-1/2” diameter oil lamp inserts slide right into your hand turned bases, adding an elegant, professional appearance. Each insert includes a fiberglass wick, wick holder and a glass insert which holds up to 2 ounces of lamp oil (not included). This will be enough to keep them burning for up to 2 hours. Set includes 4 complete inserts
Confetti Lamp Inserts
|
 |
Posted in New Products, Woodworking Hardware | Comments Off
Tuesday, July 15th, 2008
| Toggle Clamp Mounting Plate |
This convenient plate allows any of our toggle clamps to quickly and easily attach directly to a T-track. Just mount a toggle clamp to the plate, then affix the whole assembly to any T-track on the market. Use it to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with T-tracks. It’s a great way to add a hold-down to fences with top mounted T-tracks. The steel plate features adjustable slots to accommodate a wide variety of toggle clamps, and comes complete with mounting screws and all the necessary hardware and knobs. Toggle clamps sold separately.
Toggle Clamp Mounting Plate
|
 |
Posted in Clamps, New Products | Comments Off
Monday, July 14th, 2008
| Log Tenon Cutters |
These heavy-duty, state-of-the-craft cutters produce perfect tenons with 60º tapered shoulders for the sturdiest-possible log furniture construction. The funnel shaped, self-centering design ensures flawlessly shaped tenons, and dual precision-ground blades cut twice as fast as single blade models and stay sharp longer. Plus, as part of the cutters’ exclusive “IN-SIGHT” visual measurement system, slots along the shaft combine with radial grooves at 1/2″ intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in three sizes (1″, 1-1/2″, and 2″) corresponding to the diameter tenon that each will cut. All three can cut tenons up to 3″ long. 1/2″ shank.
Log Tenon Cutters
|
 |
Posted in New Products | Comments Off
Subscribe to KS Woodowork Feed