Archive for June, 2008
Thursday, June 12th, 2008
| Self-Adhesive Discs |
More efficient and less frustrating than turner’s tape, these handy double-sided adhesive discs peel and stick in no time — without wasting material! They’re perfect for attaching several workpieces for simultaneous cutting, as well as setting up templates for router inlays, jig mounting, pattern routing and more. The bigger discs (2″ and 3″ diameters) even work for securing small bowl blanks for light-duty turning. These discs feature the same adhesive auto-makers use to mount rear-view mirrors, so you can have ultimate confidence in the strength of your setups. Available in 1/2″, 1″, 2″, and 3″ diameters to fit the needs of any project. For maximum bonding strength, stock must be flat and dry.
Self-Adhesive Discs
|
 |
Posted in New Products | Comments Off
Thursday, June 12th, 2008
| Bench Dog Guide Bushing Adapter for Porter Cable |
That’s right, template routing on the router table! Fits Porter-Cable type guide bushings. Comes with centering cone, adapter and hardware. Fits all Bench Dog Tools ProLift and ProPlate Aluminum models.
Bench Dog Guide Bushing Adapter for Porter Cable
|
 |
Posted in Bench Dog, New Products | Comments Off
Wednesday, June 11th, 2008
| Bench Dog Zero Clearance Insert |
Use this zero clearance insert with small bits and small pieces of stock. Prevents small stock from falling into the router bit opening. Resists melting and won’t harm your router bits.
Fits all ProLift and ProPlate Aluminum models.
Bench Dog Zero Clearance Insert
|
 |
Posted in Bench Dog, New Products | Comments Off
Wednesday, June 11th, 2008
| Bench Dog ProRiser Profence Height Extender |
With ProRiser, you can extend the height of your fence to whatever dimension you like! Just slide the ProRiser brackets into the rear T-slot of your Profence and add a piece of 3/4″ thick stock. The stock can be very wide for maximum support, or it can be a specific width to allow surface moldings to slide through un-obstructed. Includes all necessary hardware; you just add the fence face.
Bench Dog ProRiser Profence Height Extender
|
 |
Posted in Bench Dog, New Products | Comments Off
Tuesday, June 10th, 2008
| Bench Dog T-Loc Accessory Track |
T-Loc is a horizontal 1/4″ accessory T-track. The T-slot captures 1/4″ hex-head bolts used on many aftermarket accessories. Use T-Loc to add a T-slot to your shop-made fences and jigs. T-Loc has many other uses too, such as a guide, holding stops, or other fixtures. T-Loc is the best way to attach our Feather-Loc featherboards and other Bench Dog Tools accessories to your shop-made fence. T-Loc can also be mounted to many other brands of router table fences. T-Loc may also be an effective way to add a horizontal T-track to your table saw’s rip fence. Comes in 36″ lengths. May be cut to size. Mounting will require drilling holes and obtaining proper hardware.
Bench Dog T-Loc Accessory Track
|
 |
Posted in Bench Dog, New Products | Comments Off
Tuesday, June 10th, 2008
| Bench Dog Universal Feather-Loc |
Feather-Loc with universal bracket allows attachment to a shop-made clamping board for positioning anywhere on the table. Also allows use of Feather-Loc on machines with non-standard miter slots.
Bench Dog Universal Feather-Loc
|
 |
Posted in Bench Dog, New Products | Comments Off
Monday, June 9th, 2008
| 16” and 24” Dust Shrouds |
These shrouds work with the 16″ and 24″ Omni Jig Joinery Systems to control the large amount of sawdust generated by cutting dovetails. They attach quickly to the jig and direct chips and dust to a single point underneath the jig for efficient collection.
16” and 24” Dust Shrouds
|
 |
Posted in Dust Collection, New Products | Comments Off
Monday, June 9th, 2008
| Oshlun 8” Box and Finger Joint Set |
For precision box joints at an affordable price, it’s tough to beat this set. Two 8″ diameter 30-tooth blades cut smooth, square 1/4″ and 3/8″ notches and fingers in all types of hardwood and softwood. Switching between the two sizes is easy––just reverse the inner and outer blades. Precision ground C-4 micro-grain tungsten carbide tips are resilient and high-performing for lasting sharpness and accurate joints.
Oshlun 8” Box and Finger Joint Set
|
 |
Posted in New Products, Table Saw | Comments Off
Sunday, June 8th, 2008
| Fein Precision Wood E-Cut Blade 1-3/8” Wide |
Delivering high-level precision and fast cutting speed, this blade is great for fast cuts in tight spots. Cuts wood, drywall, and soft plastics. Features double-row Japanese toothing. Flush cut capable. 1-3/8″ wide. Available individually or in packs of 3.
Fein Precision Wood E-Cut Blade 1-3/8” Wide
|
 |
Posted in Fein, New Products | Comments Off
Sunday, June 8th, 2008
| Fein Wood E-Cut Blade 2-1/2” Wide |
Delivering high-level precision and fast cutting speed, this blade is great for difficult cuts in tight spots. Cuts wood up to 2″, drywall, and soft plastics. Features double-row Japanese toothing. Flush cut capable. 2-1/2″ wide.
Fein Wood E-Cut Blade 2-1/2” Wide
|
 |
Posted in Fein, New Products | Comments Off
Saturday, June 7th, 2008
| Jumbo Plastic Pen Box |
Features a clear lid for attractive display. Holds large or small pens. Great for
high-volume individual storage or as an affordable option for gift
presentation.
Jumbo Plastic Pen Box
|
 |
Posted in New Products, Pen Turning | Comments Off
Saturday, June 7th, 2008
| Bubinga and Maple Pen Desk Sets |
These hardwood boxes are beautiful presentation options for pen/letter
opener sets. They are designed to house Americana and European style sets,
but will also accommodate pens up to 5/8″ in diameter. Available in maple
and bubinga.
Bubinga and Maple Pen Desk Sets
|
 |
Posted in New Products, Pen Turning | Comments Off
