Archive for February, 2008
Wednesday, February 27th, 2008
| 1/2” BeadLOCK Tenon Bit |
Save money by making your own Beadlock loose tenon stock — just raid your scrap bin for material. We now offer Beadlock bits in all three sizes: 1/4″, 3/8″ and 1/2″. All feature precision-machined carbide flutes for a perfect match to your Beadlock mortise, and sturdy 1/2″ shanks for minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!
1/2” BeadLOCK Tenon Bit
|
 |
Posted in New Products, Router Bit | No Comments »
Wednesday, February 27th, 2008
| 3/8” BeadLOCK Tenon Bit |
Save money by making your own Beadlock loose tenon stock — just raid your scrap bin for material. We now offer Beadlock bits in all three sizes: 1/4″, 3/8″ and 1/2″. All feature precision-machined carbide flutes for a perfect match to your Beadlock mortise, and sturdy 1/2″ shanks for minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock Router Bits, the choice is yours!
3/8” BeadLOCK Tenon Bit
|
 |
Posted in New Products, Router Bit | No Comments »
Tuesday, February 26th, 2008
| Excelsior Mini Lathe |
With solid cast-iron construction, a robust 1/2 hp motor and a precision-
machined live center, this little workhorse rivals features found in much larger
lathes. It can turn bowls of almost 10″ in diameter, and spindles up to
17-3/4″ in length, making it perfect for chair legs, small table legs and an
endless array of decorative turnings. A convenient door provides easy access
to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200
RPM. Cast-iron body provides mass for minimal vibration, stable turning and
maximum durability. To increase your spindle capacity to 38-1/2″, just use
the optional Mini Lathe Bed Extension (32307).
Excelsior Mini Lathe
|
 |
Posted in New Products, Pen Turning, Woodturning | No Comments »
Tuesday, February 26th, 2008
| Northern Maple Spalted Pen Blank |
These blanks are stabilized with resin to ensure smooth turning and can be polished to a gleaming finish. Each blank measures approximately 3/4″ x 3/4″ x 5-1/2″ long.
Northern Maple Spalted Pen Blank
|
 |
Posted in New Products, Pen Turning Blanks | No Comments »
Tuesday, February 26th, 2008
| 9” x 9” Pen Display Case |
This mitered wooden case makes a fine display for pens, turnings and irregularly shaped items. With the open design, you can arrange items however you like. The 7″ glass viewing window lets in plenty of light, while keeping out the dust. Chamfered rear edge holds lid open at 90° for easy access. All corners are mitered and splined for strength, while the soft foam liner protects the contents. Case measures 8-7?8″ x 8-7?8″ x 1-1?2″.
9” x 9” Pen Display Case
|
 |
Posted in New Products, Pen Turning | No Comments »
