Archive for November, 2007
Thursday, November 15th, 2007
| Saw Blade/Router Bit Cleaning Kit |
| With clean, cool-running cutters, you’ll get more precise cuts, a longer cutter life and spend far less on sharpening costs. Jumbo sized blade bath features a raised inner ring, which prevents the blade from suctioning to the bottom. 14″ inside diameter accepts a 12″ blade with plenty of room at the edges for easy removal. Includes blade bath with lid, 1 quart of Pitch and Resin Remover (makes 1 gallon), brass-bristled scrub brush and a 6 oz. plastic jar with lid for cleaning router bits.
Saw Blade/Router Bit Cleaning Kit
|
 |
Posted in New Products | Comments Off
Thursday, November 15th, 2007
| 3/4” Pipe Extension |
| No need to buy those long pipes that you only use once in a blue moon; now you can combine your regular pipe clamps and get extra-long lengths! Just insert it into the ends of two pipes and tighten down. Special ribbed jaws firmly grip the inside of the pipe, so there’s no need for threads. The tailpiece assembly slides right over the extender onto the other pipe. Since your normal clamps serve double-duty, it’s a great way to save money and shop space.
3/4” Pipe Extension
|
 |
Posted in New Products | Comments Off
Thursday, November 15th, 2007
Toolcrib had a post on 8 woodworking lessons learned the hard way.
The entire post can be read at: Woodworking Lessons Learned The Hard Way
I can agree with the first tip for using brass screws. Another tip to prevent the issue is to first drive a regular steel screw to tap the threads. The Brass Screw will drive without stripping out or breaking off.
KS Woodwork
Posted in New Products | Comments Off
Wednesday, November 14th, 2007
| Rubin Abrasive for Festool ETS 125 EQ |
| A robust, long wearing abrasive in grits from 50 to 180. Great on bare woods, both soft and hard, and wood composites. Special coating reduces clogging. Aluminum oxide. 5” diameter.
Rubin Abrasive for Festool ETS 125 EQ
|
 |
Posted in Festool, New Products | Comments Off
Wednesday, November 14th, 2007
| Brilliant 2 Abrasive for Festool ETS 125 EQ |
| Grits from 40 to 400 provide a super-fine finish on both bare wood and coatings. Lower grits hold up well for stripping; higher grits are perfect between coats of varnish. Aluminum oxide.
Brilliant 2 Abrasive for Festool ETS 125 EQ
|
|
Posted in Festool, New Products | Comments Off
Wednesday, November 14th, 2007
| Leigh Isoloc Joint Templates |
| By removing the Dovetail finger assembly and simply sliding on one of the three Isoloc templates, you are ready to produce some extraordinary joinery. Each template features two different joint patterns, one design carefully CNC machined on each side. A single 5/16″ or 8mm straight bit, preferably an upcut spiral, does all the cutting. Joint fit is easily adjusted in increments of 0.001″ with a turn of a barrel.
Leigh Isoloc Joint Templates
|
 |
Posted in New Products | Comments Off
Tuesday, November 13th, 2007
| Brilliant 2 Abrasive for Festool RS 2 E |
| Grits from 40 to 400 provide a super-fine finish on both bare wood and coatings. Lower grits hold up well for stripping; higher grits are perfect between coats of varnish. Aluminum oxide.
Brilliant 2 Abrasive for Festool RS 2 E
|
|
Posted in Festool, New Products | Comments Off
Tuesday, November 13th, 2007
| 3” Antique Brass Bail Pull |
| Early American style pull with antique brass finish. Post plates are steel. Bail is die cast and has built-in stop to keep clearance between bail and drawer front. Includes 7/8” trimmet screws. Attach pull from rear side of drawer face. Post plates are 1-1/16” dia. with 3” boring. Handle hangs down 1-1/4” and projects 1/2”.
3” Antique Brass Bail Pull
|
 |
Posted in New Products | Comments Off
Tuesday, November 13th, 2007
| 2-1/2” Antique Brass Bail Pull |
| Early American style pull with antique brass finish. Post plates are steel. Bail is die cast and has built-in stop to keep clearance between bail and drawer front. Includes 7/8” trimmet screws. Attach pull from rear side of drawer face. Post plates are 1-1/16” dia. with 2-1/2” boring. Handle hangs down 1” and projects 1/2”.
2-1/2” Antique Brass Bail Pull
|
 |
Posted in New Products | Comments Off
Tuesday, November 13th, 2007
| Platin 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ |
| Super-fine abrasives specifically developed for high-gloss finishes. Mounted to a 1/4’’ foam backer so they adapt to surface contours and won’t leave gouges. Ideal for wood finishes, fillers, solid surface, plastic, fiberglass and composites. Silicon oxide. Grits from 400 to 4000.
Platin 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ
|
|
Posted in Festool, New Products | Comments Off
Tuesday, November 13th, 2007
| Rubin Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ |
| A robust, long wearing abrasive in grits from 24 to 180. Great on bare woods, both soft and hard, and wood composites. Special coating reduces clogging. Aluminum oxide.
Rubin Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ
|
|
Posted in Festool, New Products | Comments Off
Tuesday, November 13th, 2007
| Brilliant 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ |
| Grits from 40 to 400 provide a super-fine finish on both bare wood and coatings. Lower grits hold up well for stripping; higher grits are perfect between coats of varnish. Aluminum oxide.
Brilliant 2 Abrasive for Festool ETS 150/3 EQ and ETS 150/5 EQ
|
|
Posted in Festool, New Products | Comments Off
